This plug and play PID Programmable Ramp and Soak (60 segments) temperature controller with circuit breaker, buzzer and flasher alarm and Ceramic thermocouple, has a wide range of applications in controlling the temperature of Kilns, Ovens, Furnaces, pottery, Glass, Annealing, ....(for loading current up to 15Amp) . This is an inexpensive and heavy duty plug and play controller box.
Features & Specifications:
· Its heavy duty kiln thermocouple can measure very high temperatures up to 2372 °F (1300 °C).
· To operate, you only need to plug the heater to the socket wire of the controller at the back, drop the sensor into the Kiln, turn on the power of controller and adjust it to your own requirements.
· Display temperature in Celsius or Fahrenheit
· Heavy duty input and output plug and socket wire
· Equipped with circuit breaker switch 15Amp (The circuit breaker can be reset and used over and over, where a fuse is a one shot deal and has to be replaced)
· Equipped with buzzer and flasher alarm for passing the temperature range & thermocouple failure
· Equipped with Thermocouple male and female connector for changing thermocouple and also wall mount box ear for easy installing on oven or wall.
· Equipped with 40amp SSR with large Heat sink
Specifications:
Input voltage |
90 to 265 VAC - 50 /60 Hz; No transformer or adaptor is required. |
Output voltage |
Same as the input. |
Maximum Current |
15A |
Controller Mode |
60 segments Ramp and soak PID control |
Output switching device |
Solid State Relay (max 15A - 24/240V AC) with zero voltage crossing switching. |
Sensor Type |
Type K 6pc Ceramic Kiln Thermocouple |
Temperature control range |
50 to 1300 °C |
Thermocouple Thread material |
Cr-Ni, Si-Ni |
Thermocouple Thread dimensions |
3.2mm (diameter ɸ) x 190 mm (long) / (0.13" x 7.5") |
Sensor cable length |
3.3 ft (1m) |
Ceramic tube shape |
6 x (1 inch Pcs, two-hole insulator) Ceramic Tube |
Ceramic tube diameter |
Oval shape: L=12.3 mm & W=10mm (L~ 0.5” & W~ 0.4”) |
Ceramic tube length |
~150 mm (~ 6.0 inch) |
Box material |
ABS |
Temperature resolution |
Dual 4-digit LED display, 0.1 °C. |
Temperature display unit |
Celsius (°C) |
Temperature accuracy |
±0.5%F.S |
Dimension |
200x120x75mm ( 7 3/4 x 4 3/4 x 3" ) |
Available Segments |
Up to 60 segments available for a program |
Detective Temperature Range |
-200 to 1800 °C (depends on input type) |
Patterns |
Be able to program different patterns with different segments |
Input |
Thermocouple: (K,S,E,J,T,B,N) Linear Voltage and current:0-5V,1-5V,0-1V,0-100mV,0-20mV,0-60mV,0.2-1V(100-500mV),-20 -+20mV(0-10V) -5V- +5V(0-50V), -100 - +100mV(2-10V) |
Output |
Voltage pulse to drive SSR |
Control action |
Heating , Cooling |
Response time |
Less than 0.5S (configurable) |
Accuracy |
0.2%FS+- 0.1C(Cu50 cooper resistor compensation or ice point compensation) |
Temperature drift |
Less than 0.01%FS 0C (Typical value is 50ppm/0C) |
Resolution |
10C or 0.10C(automatically change to 10C when the temperature is higher than 999) |
Display |
Dual line - four digit - LED display |
Decimal points |
Configurable for all inputs |
Control Method |
ON/OFF AI MPT with auto tuning, adopting fuzzy logic PID algorithm |
Auto/Manual Control |
Auto/manual bump less transfer from front panel |
Auto-tuning |
Auto-tuning and manual tuning available |
Alarm Mode |
Absolute value high limit, Absolute value low limit, Deviation high limit alarm, Deviation low limit alarm. |
Alarm stand by |
In some occasions, for example, in the heating process, when the alarm is set to as low deviation alarm, right after the power is turned on, the alarm will be triggered but there is no problem in the system, the alarm block function can solve this problem. |
Soft start function |
In some particular application, 100% output ratio is not allowed when the power just turned on; soft start function is a great feature to solve this problem. |
SV re-transmission output |
available, as feed of PLC or indicator or paperless recorder |
Power Supply |
90~260VAC |
Dimension (DIN 1/8) |
96mm*48mm (Horizontal) |
Mounting |
Panel Mount |
Notes for customer outside North America,
For international order, an US power cord is included. User can cut plug and socket wire and change it to the power plug and socket outlet that meets the local standard for the input and output.
For countries that use 220-240VAC power line, the maximum control power of this controller is 3300 Watts.
shipping to
USA is 3-6 business days
shipping
to England and Ireland is 4-7 business days
shipping to
other Europe Countries 5-10 business days
shipping
to Canada is 2-7 business days
shipping to Australia, New Zealand and Asia takes longer than other countries (17-25 Business days)