This controller serves the purpose of monitoring and controlling temperature and humidity levels. Equipped with a buzzer and flasher alarm, it alerts users when the maximum or minimum limits are exceeded, preventing potential damage. For example, if humidity rises in a basement due to a faulty dehumidifier or water leakage, the controller triggers an alarm sound. The same applies to temperature thresholds.

Additionally, the controller records the maximum and minimum temperature and humidity values during operation, allowing for better customization and efficient control. It offers the flexibility of using either two separate outputs or combining them into one. This enables simultaneous control of humidity and temperature using a single fan. For instance, the fan can be set to turn on when the temperature reaches 28°C or humidity reaches 55%RH and turn off when the temperature reaches 26°C and humidity reaches 45%RH.

Technical Parameters:

• Accuracy: ±1°C, 0.1%RH
• Power consumption: <3W
• Temperature measuring range: -20°C to +80°C
• Humidity measuring range: 0%RH to +100%RH
• Sensors: Humidity and temperature sensor with 1m wire length
• Power supply: AC 100-240V
• Output: 2 outputs with 10 Amp load

Features:

• Two relays with one sensor and two independent outputs
• High and low buzzer alarm and flasher for temperature and humidity
• Two-color display (red for temperature and blue for humidity)
• Control of temperature and humidity by setting start and stop values
• Temperature and humidity calibration
• Recording of maximum and minimum temperature and humidity
• Timer delay for each temperature and humidity output

Setting Start and Stop Temperature and Humidity Modes: You can configure the start and stop temperature and humidity values using this mode. The controller automatically identifies the heating or cooling mode, as well as the humidifier or dehumidifier mode.

• Heating mode: Start temperature is lower than the stop temperature.
• Cooling mode: Start temperature is higher than the stop temperature.
• Humidifier mode: Start humidity is lower than the stop humidity.
• Dehumidifier mode: Start humidity is higher than the stop humidity.

Temperature and Humidity Calibration: The controller provides a calibration function for temperature and humidity readings. You can adjust the values within the range of -10 to +10, allowing for positive, negative, or zero calibration.

One Set Includes:

• 1 x Humidity and Temperature Controller
• Sensor (Temperature and humidity sensor)
• 1 x Instruction Manual