ENGINE WATCHDOG  CAR OVERHEATING SENSOR GAUGE ALARM

displays your true engine temperature and alarms with a BUZZER (AUDIBLE) in an overheating emergency.

The heat sensor simply fits like a washer under any suitable bolt that is close to the cylinder head or engine block. (If you want to check the radiator temp, you can connect  Temperature Sensor to the upper radiator hose  too). The sensor detects changes so quickly, drivers can see their engine temperature rise and fall degree by degree (with 0.1 degree resolution) as they drive in varying traffic and road conditions

 

you don't even need to know your engines temperature specifications to set the overheating alarm. You simply note the highest temperature your engine reaches during normal driving, then set the audible alarm to go off at a few degrees higher.  I

This controller can be set to alarm at any temperature from -50 to 110 degrees C

 

It can be fitted by any home handyman. The main unit fits under the dash (Compact size - 75 (W) x 86 (H) x 35 (D) mm, plus mounting tabs . The power just connect to 12V DC by wire.

The Controller has  relay output too, so you can control the fan by your controller too .Also if your cars has  two fans  or you installed extra fan, you can set one of the fans to kick lower temperature to give you stable control over your water temperature.

 

This unit Suitable for all equipments which need Heating control or Refreigerating control or even need both of them in the same time (Automatic Switching between Refreigerating and Heating).It also equiped wit High temperature Alarm set point that if cooling system doesn't work properly, the Alarm buzzer will beep when the temperature passed from alarm setpoint.

 

It can use as a water temperature gauge and also temperature controller gauge too .

100% Brand new in Box with MANUAL, High performance and Top quality.

 

Guarantee your Insured Undamaged and Fast shipping by purchasing from a North America located seller.

 

Ready for Immediate Shipment.

 

This mini Temperature Controller is an excellent, reliable, accurate and convenient multifunction device for controlling temperature when you need control temperature precisely and constantly. Suitable for all equipments which need Heating control or Refreigerating control.

 

It is an ideal solution for a wide range of professional applications to automatically control temperatures of -50 to 110 °C (-58 to 230°F).

 

 

Features

• Mini and light design
• Large and clear LCD display
• Temperature Range -50 ~ 110 °C (-58 to 230°F).
• Dual heating and cooling function  
• Control temperature by setting the temperature set value and the different value
• Temperature Calibration  
• Wiring diagram for installation included

 

Temperature Controller Specifications

• Temperature Measuring Range: -50 ~ 110 °C
• Control temperature range: -50 ~ 110 °C (adjustable)
• Control temperature difference: 1 - 15 °C (adjustable)
• Auto switch between heating and cooling
• High alarm set point with buzzer
• Resolution: 0.1 °C
• Accuracy: ± 1 °C (-50 ~ 70 °C)
• Sensor error delay: 1 minute
• Relay contact capacity (Heating): 10 Amp
• Relay contact capacity (Cooling): 10 Amp
• Compressor delay protection time: 0 ~ 10 minutes (adjustable)
• Operating Temperature: 0 ~ 60 °C
• Storage Temperature: -30 ~ 75 °C
• Operating Relative Humidity: 20 ~ 85 % (No condensation)  
• Power Supply: 12 V AC/DC
• Power consumption: < 2 W
• Cable length: 3 m (near to 10 feet)
• Define LS or HS (Lower and Higher set point) between -50 to 110 C
• Item dimensions: approx. 75 (W) x 86 (H) x 35 (D) mm (2.95’ x 3.39’ x 1.38’ inch)
• Item weight: 180 g

 Thermocouple Specification

• Measurement range: -50 to 110 C
• Cable length (L): 10 ft (3m)
• Sensing tip material : washer type cupper sensor  
• Washer inside diameter : 6.2mm  
• Sensor type: Negative Temperature Coefficient NTC sensor 

Wiring work

The unit is of a panel mount design . This unit is supplied with wiring diagram of how to fix the main unit to your application systems.  

 

One Set Included

• 1 x Mini-Temperature Controller
• 1 x Temperature sensor probe with 3m cable
• 1 x Instruction Manual

 

 

"Thanks for taking time and observing this ad"

 

 

Our shipping service is fast for example:

shipping to USA is 3-6 business days

shipping to England and Ireland is 4-7 business days

shipping to other Europe Countries 5-10 business days

shipping to Canada is 2-7 business days

                                    

shipping to Australia, New Zealand and Asia takes longer than other countries (17-25 Business days)