Good News:
We have USA Warehouse in United States,so we will ship from USA Warehouse to United States.
Package:
100% Brand New and High Quality!!!
1. USBCNC breakout board
1) Products brief introduction
USBCNCV4.0 is a high performance motion controller which based on PC software USBCNC control, the system can complete the conversion from G code to connect stepper motor’s driver motion control signal without requiring any additional hardware and software. This control card is compatible with most stepper driver and servo driver,it is a perfect controller that instead of parallel Mach3 interface board.
This interface board is based on USBCNC MK1 and just use in our provide software and function, cannot support other versions of the software and function
Minimum configuration:
1) CPU:1GHz
2) Memory: 512MB
3) 500MB free disk space
4) DIRECTX9 graphics device with WDDM 1.0 or higher driver
5) USB 2.0 interface
6) Net FRAMEWORK 3.5SP1
7) Support system : Win XP/7/8/10
The recommended configuration:
1) CPU:2GHz dikaryon
2) Memory: 2GB;
3) 1G free disk space
4) DIRECTX9 graphics device with WDDM 1.0 or higher driver
5) USB 2.0 interface
6) Net FRAMEWORK 3.5SP1
The recommended configuration:
1) CPU:2GHz dikaryon
2) Memory: 2GB;
3) 1G free disk space
4) DIRECTX9 graphics device with WDDM 1.0 or higher driver
5) USB 2.0 interface
6) Net FRAMEWORK 3.5SP1
3.Production feature
1. After the revision,V4 version using the red PCB board, PCB size is 135.3*82.5mm.;
2. The front of the narrow edge placed with USB communication interface and DB9 hand control interface for the convenience of customers drawn from the case panel directly;
3. The back-end of narrow edge is power input and output interface and 3 relay output interface; relay is strong interference source, relay away from the design of main control chip, it is conducive to the stability of the board;
4. One of the two wide sides is stepper motor and principal axiscontrol signal output;
5. The another side of two wide sides is the emergency stop, manual speed input, limiting input interface; one side for the input, another side output connection mode is simple and convenient;
6. 5V and 12V power module compact independence, security, stability;
7. External ensure the stability of the system work effectively with crystal active and main control chip shield;
8.outline dimension is 135.3*82.5mm, product positioning hole installment dimension is 127*75mm
9. The software is USBCNC,not mach3,pls note!
This item is easy to operate for DIY hobby user,but it is control by USB port,so need more careful for the software install,and pls must be strict read the user manual and follow us.
Description:
| Limit switch connection method
| Wiring between Motor Driver & Breakout Board
|
A) USB interface,connect to the computer USB port through this interface. B) Hand control box interface,external hand control box can use this interface to access the system,the interface is standard DB9 form,its definition as shown in the table 4-1. C) Power indicator D) Board card firmware upgrade button UP and reset button RST, firmware has been updated. E) Manual speed control interface (GND,JOG,VCC) F) Limit input interface. Limit interface definitions are listed in the following table 4-2 | G) Spindle control selector switch,the switch shift up to the S1 position for the spindle speed control ; switching switch position On below for output control MIST relay . H) External pause and reset interface; the 2 feet marked PAUSE connect suspend switch, 2 feet marked RESET connection reset switch. I) Software MIST control relay output, software settings output marked 3, defined from top to bottom, 3 feet is NC, NO, COM. J) Software FLOOD control relay output ,output marked 2 in the software settings , defined from top to bottom, 3 feet is NC, NO, COM. K) Software SPINDLE control relay output,output marked 1 in the software settings , defined from top to bottom, 3 feet is NC, NO, COM. L) Board working power input,input DC 15~36V | M) 12V output interface.as the board marked, GND is -, 12V is +. L) Board working power input,please pay attention to input DC 15~36V,overvoltage or reverse connection will damage the board. N) Spindle control output interface: definitions turn for GND DIR PWM2 12V, respectively is ground,direction signal output, spindle 0-10V speed control signal output, 12V output. O,P,Q,R) A,X,Y,Z axis stepper motor control signal output, the definition is:CK+\CK-\DIR+\DIR-,respectively is impulsion positive, impulsion negative, direction positive, direction negative |
Drive any 4A phase current of 2-phase or 4-phase hybrid stepping motor;
Suitable for a variety of small and medium-sized automation equipment and instruments,for example: Small engraving machine, cnc router machine, etc.
FMD2740C FMD2740C driver is suitable for driving small and medium-sized phase current is less than 4A 2-phase or 4-phase hybrid stepping motor. Due to the adoption of the new bipolar constant current chopper drive technology, using the same motor can output more speed and power than other drivers. Segments stepper motor running accuracy improved, reduces vibrations and noise reduction.
3. Stepper Motor
Technical Specifications
Part No.: 23HS2430B
Frame Size: NEMA23
Step Angle: 1.8 degree
Current: 3.0A/phase
Resistance: 1.6 Ohm/phase
Inductance: 6.8 mH/phase
Holding torque:280N.cm/28kg-cm;425 oz-in
Rotor inertia: 800g-cm2
Number of wire leads: 4
Weight: 1.66 kg
Length: 112mm
General Specification:
Step angle accuracy:+ - 5%(full step,not load)
Resistance accuracy: + - 10%
Inductance accuracy:+ - 20%
Temperature rise: 80deg Max(rated current,2 phase on)
Ambient temperature ----------—20deg ---- +50deg
Insulation resistance:100ohm Min,500VDC
Insultion Strength--------500VAC for one minute
Datasheet(23HS2430B,Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length,425 oz-in or 28kg.cm holding torque)
This product also has a single shaft for choice, the need to invite the message.
Wiring:
4.Switching power supply
400W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:36V,single output switching power supply
Specification
It comes with built-in cooling fan | Connection instruction
| 110V or 220V
|
5.Usage or Application
Shipping
· Please open the package and check if there are some damages before sign, if there are some damages,please do not sign and contact us immediately
· We ship to worldwide but if your country’s custom is strict, please contact us before you bid to check detail and confirmed.
· Please check out your address carefully when processing order.We are not responsible for wrong or undeliverable address.
Problem&Feedback
· Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
· If you are not satisfied, please contact us to resolve any issues. Please do NOT leave negative feedback without asking for help. We work hard to make sure EVERY CUSTOMER 100% satisfaction.
· For any inquiries,issues or assistanceplease contact us via eBay message
Refund
· When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos to us.
· Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost
Contact us
· Please feel free for any questions, all the emails will be replied within 1-2 business days,if you didn’t receive any mail, maybe it’s in the junk mail fold.
· We are online from Monday to Saturday.