LIQUI MOLY WINDSCREEN FITTING KIT 1x BONDING ADHESIVE ACTIVATOR GLUE SEALANT
Item Description
PRODUCT 1:
1-component, cold-application, moisture-curing PUR adhesive for direct glazing of vehicle windows in the case of repairs. Liquifast 1502 was tested in a crash by the TÜV testing agency. The bonding agent is characterized by its extremely fast hardening properties and excellent rigidity. Vehicles whose windows were bonded using Liquifast 1502 are ready to be driven after just 1.0 hour of drying time, with or without driver airbag/dual airbags, according to general test conditions. Liquifast 1502's increased torsional rigidity increases driving safety and comfort. This type of adhesive is especially prescribed if the vehicle windows contain heating elements or vehicle antennas.
PROPERTIES
- TÜV tested
- fast bonding properties
- cold working
- proven OEM quality
- cured by moisture in the air
- high-modulus
- high viscosity
- non-conductive
AREAS OF APPLICATION
Bonding front and rear windscreens and side windows to vehicle bodies (passenger vehicles, heavy goods vehicles, the drivers? cabs of tractors and forklift trucks and special vehicles). Bonding in side windows made from single glass and insulation glass in bus and wagon building. And the following makes of cars: Audi, BMW, Daimler Chrysler, Ford, Jaguar, Opel, Porsche, Renault, Saab, Seat, Skoda, Volvo, Volkswagen.
COMMENT
Recommendations for use are provided in the brochures supplied.
APPLICATION
1. Cleaning agent
The surfaces to be bonded have to be dry and free of oil, dust, grease and other dirt residues. The glass surface or the ceramic coating has to be cleaned with Liquiclean or cleaning and diluting agent, Item No. 6130, and then with the glass-cleaning foam Item No. 1512. Also the car body flange or the newly painted car body parts are to be cleaned that way. We recommend cleaning the cut back residual adhesive bead with Liquiclean or cleaning and diluting agent as well. Before the sealant is applied, or before the glass surface is bonded, the cleaned holding surface has to have dried completely.
2. Priming / activation of pre-coated glass panes
Active Primer is necessary for the priming of the holding surface, when glass panes are to be bonded. The Active Primer is included in the delivery of the glass pane repair set as 10 ml stick. Prior to use, shake Active Primer well for at leas 45 sec. Within the bond area, Active Primer can universally be applied on the cleaned glass surface or the ceramics silk screen, on the clean painted surface of newly painted parts of the car body, on the cut back residual adhesive beads, as well as on pre-coated glass panes (PUR and RIM coating).
Apply Active Primer sparsely and uniformly (wet film has to have a thickness of approx. 0.05 mm). The primed surface has to dry for approx. 15 minutes before the glass adhesive is applied. If the residual adhesive bead has been cut back more than 6 hours ago, a pre-treatment with Active Primer is mandatory.
PRODUCT 2:
Active Primer is an "all-in-one product" with additional functions for glazing using polyurethanes (PUR). The product is a bonding agent for glass, ceramic screen printing and paints for use with all PUR adhesive and sealing compounds. At the same time, Active Primer is a PUR activator for residual PUR beading, PUR base coats and RIM coatings.
PROPERTIES
- accelerated adhesion build-up
- bonding agent for residual PUR beading
- satisfies OEM requirements
- extremely high UV resistance
- bonding agent for glass and ceramic screen printing
- bonding agent RIM coatings
- bonding agent for PUR base coats
- bonding agent for paints
- good corrosion protection
AREAS OF APPLICATION
Used as a bonding agent and for UV protection of direct-glazing sealants. Also as a bonding agent for PUR base coats (e.g. Volkswagen), bonding agent for residual PUR beading and RIM coatings (e.g. Opel).
APPLICATION
Before application of the primer, it should be noted that the bonding surface is to be cleaned so that it is clean and free of grease. We recommend cleaning with Liquiclean 1599 or Cleaner and Thinner in the bonding area of the bodywork flange as well as the windshield and for the ceramic screen printing. Additional cleaning with Liqui Moly Window Cleaner Foam is required to remove all contaminants. Shake primer well (at least 45 seconds after the steel balls have worked free in the case of aluminum bottles) before use.
Note This product is moisture-sensitive. Remaining contents of the sticks and 30 ml containers are to be disposed of after being used once. 100 ml containers which have been opened must be closed again immediately after extracting contents and used within 3 days.
1-component, cold-application, moisture-curing PUR adhesive for direct glazing of vehicle windows in the case of repairs. Liquifast 1502 was tested in a crash by the TÜV testing agency. The bonding agent is characterized by its extremely fast hardening properties and excellent rigidity. Vehicles whose windows were bonded using Liquifast 1502 are ready to be driven after just 1.0 hour of drying time, with or without driver airbag/dual airbags, according to general test conditions. Liquifast 1502's increased torsional rigidity increases driving safety and comfort. This type of adhesive is especially prescribed if the vehicle windows contain heating elements or vehicle antennas.
PROPERTIES
- TÜV tested
- fast bonding properties
- cold working
- proven OEM quality
- cured by moisture in the air
- high-modulus
- high viscosity
- non-conductive
AREAS OF APPLICATION
Bonding front and rear windscreens and side windows to vehicle bodies (passenger vehicles, heavy goods vehicles, the drivers? cabs of tractors and forklift trucks and special vehicles). Bonding in side windows made from single glass and insulation glass in bus and wagon building. And the following makes of cars: Audi, BMW, Daimler Chrysler, Ford, Jaguar, Opel, Porsche, Renault, Saab, Seat, Skoda, Volvo, Volkswagen.
COMMENT
Recommendations for use are provided in the brochures supplied.
APPLICATION
1. Cleaning agent
The surfaces to be bonded have to be dry and free of oil, dust, grease and other dirt residues. The glass surface or the ceramic coating has to be cleaned with Liquiclean or cleaning and diluting agent, Item No. 6130, and then with the glass-cleaning foam Item No. 1512. Also the car body flange or the newly painted car body parts are to be cleaned that way. We recommend cleaning the cut back residual adhesive bead with Liquiclean or cleaning and diluting agent as well. Before the sealant is applied, or before the glass surface is bonded, the cleaned holding surface has to have dried completely.
2. Priming / activation of pre-coated glass panes
Active Primer is necessary for the priming of the holding surface, when glass panes are to be bonded. The Active Primer is included in the delivery of the glass pane repair set as 10 ml stick. Prior to use, shake Active Primer well for at leas 45 sec. Within the bond area, Active Primer can universally be applied on the cleaned glass surface or the ceramics silk screen, on the clean painted surface of newly painted parts of the car body, on the cut back residual adhesive beads, as well as on pre-coated glass panes (PUR and RIM coating).
Apply Active Primer sparsely and uniformly (wet film has to have a thickness of approx. 0.05 mm). The primed surface has to dry for approx. 15 minutes before the glass adhesive is applied. If the residual adhesive bead has been cut back more than 6 hours ago, a pre-treatment with Active Primer is mandatory.
PRODUCT 2:
Active Primer is an "all-in-one product" with additional functions for glazing using polyurethanes (PUR). The product is a bonding agent for glass, ceramic screen printing and paints for use with all PUR adhesive and sealing compounds. At the same time, Active Primer is a PUR activator for residual PUR beading, PUR base coats and RIM coatings.
PROPERTIES
- accelerated adhesion build-up
- bonding agent for residual PUR beading
- satisfies OEM requirements
- extremely high UV resistance
- bonding agent for glass and ceramic screen printing
- bonding agent RIM coatings
- bonding agent for PUR base coats
- bonding agent for paints
- good corrosion protection
AREAS OF APPLICATION
Used as a bonding agent and for UV protection of direct-glazing sealants. Also as a bonding agent for PUR base coats (e.g. Volkswagen), bonding agent for residual PUR beading and RIM coatings (e.g. Opel).
APPLICATION
Before application of the primer, it should be noted that the bonding surface is to be cleaned so that it is clean and free of grease. We recommend cleaning with Liquiclean 1599 or Cleaner and Thinner in the bonding area of the bodywork flange as well as the windshield and for the ceramic screen printing. Additional cleaning with Liqui Moly Window Cleaner Foam is required to remove all contaminants. Shake primer well (at least 45 seconds after the steel balls have worked free in the case of aluminum bottles) before use.
Note This product is moisture-sensitive. Remaining contents of the sticks and 30 ml containers are to be disposed of after being used once. 100 ml containers which have been opened must be closed again immediately after extracting contents and used within 3 days.
About Us
Our aim at World of Lubricant is to provide you with the best possible customer service and value for money.We are approved distributors of LIQUI MOLY brand. This guarantees you that your item is brand new and 100% genuine.If your preferred item is out of stock you can get in touch with us and we will do our best to order it especially for you.
Payments
We currently accept PayPal payment.Once full payment is receive your goods will be dispatched. If there is any issue with payment please contact us through eBay messages.
Shipping
We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three or four days after dispatch.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Please be aware that is courier was attemted to deliver parcel 3 times after it come back to us. In this Case £6 handling fee will be applied and deducted from total refund amount
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.The buyer is responsible for return postage costs.You can return a product for up to 30 days from the date you purchased it.Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Feedback
Positive feedback is very important to us and we will always strive to provide 100% customer satisfaction in order to achieve this.Once you have received your item and are happy with the purchase could you please leave a positive feedback and a 5 star DSR.Should for any reason a problem arise, please do not leave a negative / neutral feedback or open a return request please contact us immediately so we are given the chance to rectify the issue amicably.We will provide you with a positive feedback once we have received payment confirmation.The DSR rating 1 to 3 star is equal to negative feedback please always leave a 5 star if we deserve it thanks in advance.
Helpful Links
More Items!
LIQUI MOLY WINDSCREEN FITTING BONDING ADHESIVE GLUE SEALANT GLASS 310ML 4x
£69.99
LIQUI MOLY WINDSCREEN FITTING KIT 2x BONDING ADHESIVE ACTIVATOR GLUE SEALANT
£46.99
LIQUI MOLY WINDSCREEN FITTING KIT 3x BONDING ADHESIVE ACTIVATOR GLUE SEALANT
£59.99
LIQUI MOLY WINDSCREEN FITTING KIT 12x BONDING ADHESIVE ACTIVATOR GLUE SEALANT
£189.99
Powered by Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.