Product Description
Add
TOUGH MASTER®’s powerful heat gun to your collection of favorite tools,
and start speeding through a wide range of tasks. The TM-HG612 electric
heat gun has a 2000W motor that generates enough heat and air flow for
day to day projects, from plumbing to renovation work. The high
efficiency ceramic heating element for this corded heat gun heats up in a
few seconds, so that you can get to work straight away. You can choose
from two power modes and a wide range of settings I (max): 350℃,
250L/minute; II (max): 600℃, 550L/minute with a cooling down mode of
50℃, 550L/minute. Because TOUGH MASTER®’s TM-HG612 corded hot air gun
can run continuously for 500 hours, you can easily get your job done in
one go. Thanks to the easy to operate controls, you can switch the
temperature between the low heat setting of 50°C to the maximum of 600°C
with a single push of a button. The adjustable temperature settings
allow you to perform a whole range of tasks, from stripping wallpaper,
paint or varnish to thawing frozen pipes or reshaping PVC pipes and
parts. This best heat gun for PVC pipe is equipped with a digital
display, so that you can clearly see the temperature and air volume.
Thanks to the built in power on memory function, your electric heat gun
will continue to work at the temperature and speed set last time without
you having to reset it. The contoured, rubberised handle for this
electric heat gun provides an ergonomic grip for comfortable use, even
for long periods. When you rest the hot air gun on its integrated stand,
you can free up both hands so that you can hold your work piece useful
when performing close work. Thanks to the 1.8m power cable, you can be
sure of an even greater reach when using this best heat gun for PVC pipe
great if the power outlet isn’t next to where you’re working. Securely
store your heat gun paint stripper when it's not in use by using the
storage loop. This heat gun comes with 4 nozzles: The reduction nozzle
funnels heat to a smaller area, useful for stripping paint in corners.
The surface nozzle focuses hot air onto a surface for drying, removing
paint or thawing. Use the corded heat gun reflector nozzle to disperse
heat evenly around an area of the work piece when bending PVC pipes or
thawing pipes. The glass protection nozzle for this electric heat gun
deflects the heat, protecting the glass when stripping paint from a
window frame or softening putty. For added peace of mind, this electric
heat gun has overheating protection: When the temperature exceeds the
set temperature, the heat gun automatically switches off, which means
that this hot air gun is safe for use. This corded hot air gun has 2
shut down modes: Press the shut down button, wait until the blue
indicator lights up and the device will shut down after 30 seconds’
cooling. If you hold the button for 3 seconds, the unit will shut down
immediately.
Contents Of This Product
- 1 x 2000W heat gun
- 1 x reflector nozzle
- 1 x surface nozzle
- 1 x reduction nozzle
- 1 x glass protection nozzle
Benefits- POWERFUL MOTOR: The
2000W motor for this corded heat gun generates enough heat and air flow
for almost any every day project. Its high efficiency ceramic heating
element heats up in just a few seconds. This corded hot air gun has two
power modes I (max): 350℃, 250L/minute; II (max): 600℃, 550L/minute.
Cooling down mode for this electric heat gun is 50℃, 550L/minute. The
TOUGH MASTER® TM-HG612 heat gun can run continuously for 500 hours
- 12 TEMPERATURE SETTINGS: When
using this hot air gun, you can switch the temperature between the low
heat setting of 50°C to the maximum of 600°C with a single push of a
button. The adjustable temperature settings allow you to perform a whole
range of tasks, whether you’re a plumber, painter & decorator or
general contractor; that makes this electric heat gun the perfect heat
gun paint stripper and the best heat gun for PVC pipe
- LCD DISPLAY & MEMORY FUNCTION:
Thanks to its digital display, this electric heat gun clearly shows the
temperature and air volume settings so that you can make sure that
you’re using the correct heat and air flow levels for your task. The
corded heat gun also has a built in power on memory function and will
continue to work at the temperature and speed set last time without you
having to reset it, which means that you’re back to work in no time
- ERGONOMIC DESIGN:
This electric heat gun has a contoured, rubberised handle to provide an
ergonomic grip for comfortable use, even for long periods. Resting the
hot air stripper on its integrated stand means that you can keep both
hands free to hold your work piece when performing close work. The 1.8m
cable for this heat gun paint stripper expands your work area, so you
can move around easily to perform your tasks more quickly. Use the
hanging loop to safely, securely store your heat gun paint stripper when
it's not in use
- 4 TYPES OF NOZZLES: This best
heat gun for PVC pipe comes with 4 nozzles: The reduction nozzle funnels
heat to a smaller area, useful for stripping paint in corners. The
surface nozzle focuses hot air onto a surface for drying, removing paint
or thawing. Use the reflector nozzle to disperse heat evenly around the
whole work surface, useful for bending PVC pipes and warming or thawing
pipes. The glass protection nozzle deflects the heat, protecting the
glass when stripping paint from a window frame or softening putty
- OVERHEATING PROTECTION & 3 SECOND SHUT DOWN: When
the temperature exceeds the set temperature, the heat gun automatically
switches off, which means that this hot air gun is safe for use. This
corded hot air gun has 2 shut down modes: Press the shut down button and
wait until the blue indicator lights up, and the device will shut down
after 30 seconds’ cooling. Hold the button for 3 seconds and the unit
will shut down immediately
Product Specifications- Rated power: 2000W
- Rated voltage: 220-240V
- Rated frequency: 50Hz
- Heating element: Ceramic
- Temperature setting Type FIXED/MULTI
- Cable length: 1.8m
- Memory function
- LCD display for temperature and air volume
- 12 temperature settings (°C)
- Cool down: 50°C
- Setting 1: 50°C, 100°C, 150°C, 200°C, 250°C, 350°C
- Setting 2: 100°C, 200°C, 300°C, 400°C, 500°C, 600°C
- 2 airflow settings (l/min):
- Speed 1 – 250l/min
- Speed 2 – 550l/min
- Cool down: 550l/min
- Certificates: CE, UKCA, GS, TUV, Intertek, ROHS
- Weight: 750 grams
- Dimensions: 25.5 x 10 x 24cm
BRAND: TOUGH MASTER
BAR CODE: 5060279874844
PART NO: TM-HG612