Package including:

1 x 2.2KW 2200W Water-cooled spindle motor ER20  (ER20, 220V,400Hz,24000rpm,4 bearings)
1 x 2.2KW 2200W VFD Inverter 220V (Huan Yang Brand)
1 x 80mm clamp cast aluminium bracket Clamp
1 x 80W Water Pump 3.2m 220V
1 x 6M length water pipe 
 1 x ER20 collet full set 14pcs 1-13mm

(1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm,6mm, 7mm,8mm,9mm,10mm,11mm,12mm,13mm each 1pcs) 

 English user manual of inverter

100% Brand New and High Quality!!!

2.2KW WATER-COOLED SPINDLE MOTOR ENGRAVING MILLING GRIND ER20 

Specification:

Material: Stainless Steel

Size: Φ 80x213mm(Middle body diameter:80mmxLength:213mm)

Power: 2.2Kw

Voltage: 220VAC

Current: 8A

Frequency: 0-400Hz

Speed: 10-24000rpm

Cooling: Water-cooled

Accuracy: 0.003--0.005mm

Runout off: Less than 0.01mm

Bearing Lubrication: Grease

Collet size: ER20 

Bearings: 4pcs Bearings(C7005x2 + C7002x2),P4 class 

Net Weight: 5.1kg

Main application: Wood, Aluminum, Stone, metal, glass, PVC industry

Water-Cooled Spindle Motor

Using scientific water circulation design, the heat dissipation effect is better, which can ensure the smooth running of the spindle. It's mainly suitable for wood, plastic, acrylic, pvc, pcb, MDF board,carbon fiber, density board and soft metal like copper, brass,aluminum and the similar materials.

High Quality Bearings & ER20 Collet

Using optimized bearings, this series of bearings has strong hardness and rust resistance, as well as dynamic balancing technology, the actual runout off of the spindle is close to 0.01mm, the precision tapered bore is less than 0.005mm, high precision and durable.

Connect Spindle Motor to VFD

Low noise: dynamic balance technology can effectively reduce the noise during use The wiring method of the spindle motor and the inverter is as follows: VFD's U= Spindle's U1 VFD's V= Spindle's V1 VFD's W= Spindle's W1 Connect any 2pin terminal "R", "S" or "T" of the inverter to "220VAC".

 

 

 

2. HY brand 2.2kw Inverter VFD  220V

1)PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;

2)Easy PLC function can realize 16 legs of speed and inverter control function;

3)RS485 communication port, adopting standard international MODBUS main circuit control;

4)With extremely strong anti-jamming capability

5)Low output ratting torque0.5HZ-150%, low speed running ability;

6)Carrier adjustable by 16KHZ, completely soundless working environment;

7)Broad voltage working area, normal running in 220-240V;

8)Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;

9)Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;

10)With perfect error protection and short circuit starting protection capability;

Tech parameters:
1) Input Voltage: 220V(+/-15%)
2) Output Voltage : 220V
3) Input Frequency: 48-63 Hz
4) Output Frequency: 0-400 Hz
5) Input Phase: 1 phase
6) Output Phase: 3 phase
7) Warranty: 3 years from the date you purchased

Notice:
VFD has already adjusted the following parameters before leaving the factory and can directly run the spindle.

PD000 = 0 (to unlock parameters or changes will not be saved, 1 to lock parameters)
    PD003 = 400 Hz
    PD004 = 400 Hz
    PD005 = 400 Hz
    PD007 = 20 Hz
    PD008 = 220v
    PD009 = 15
    PD010 = 8
    PD011 = 150 Hz ( minimum speed to cool the engine )
    PD014 = 12 (minimum acceleration)
    PD015 = 15 (minimum deceleration)
    PD070 = 1 (manual, 0 = mach3 control)
    PD072 = 400
    PD073 = 120
    PD144 = 3000 (24000rpm)


Advantage:
1) Control mode is SPWM,it is very easy to use and convenient;
2) Protection functions are very strong;
3) Fin over-heat protection;
4) Overload protection;
5) Fuse protection;
6) Restart after instant stop,stall protection;
7) Powful function;
8) Reliable quality.

 

 

3. 80mm cast aluminium bracket

 

80mm Spindle Motor Mount

Made of high quality cast aluminum, this spindle motor mount is strong and durable. The surface is well finished by sand blast which ensures a better smoothness. This bracket would be a great replacement for CNC parts.

Water Pump

Power: 80W Voltage: 220V AC Flow Rate: 3500L/H Lift Height: 3.5M

14pcs ER20 Collet

Size:1mm,2mm,3.175mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm First class 1065 carbon steel Hardened and precision ground Made of high grade specially formulated spring steel