The USB interface connected to the 2.5 and 3.5 inch IDE and SATA hard disk interface; USB2.0 TO IDE/SATA high-speed connection. USB2.0 high speed transmission, stable , Support cd-rom, DVD, cd-rom, CD - RW, DVD RW.
Support system: 2000, me, XP, Vista and OS; Under 2000 / ME/XP/Vista, don't need ; the solidification structure, stable
USB transfer IDE/SATA conversion line
conversion integration (2.5 inch, 3.5 inch, type hard disk ( 320 g), cd-rom (The recorder)
support hot plug, plug and play. can be used in hard disk, cd-rom, , MO, ZIP transfer thereof. good compatibility, can realize data exchange across the hardware platform. transfer rate , the transfer rate of up to 480 MB/s.

Using Information:
1. Place the hard disk (add hard disk box) of the jumper wire to the disc (MASTER) mode Before using.
(there is no cord and other accessories)
2.the connection order
(1)first connect the cord line to 220 v mains.
(2)connect the adapter to the cord end (so as to spark phenomenon caused by the electric current is too , a few may be burned adapter).
(3) connect the USB cable to your PC, and on the hard disk box , can exchange data after the computer identify USB device a few minutes later.
3. hard disk box removal
Remove the Hard disk box as the way of USB device removal, and then pull out the hard disk box.
ice : The adapter belongs to High heating equipment, please pay attention to keep good heat dissipation.Please remove the ac adapter, If you do use it. Do connect it with the wi board, so as to accelerate the ageing of the electronic components and lower the service life of the product. Summer , the weather is hot, don't use hard disk box or dr