The laser active element TLGI-1 is intended for use in the ILGI-503 pulsed emitter and provides coherent radiation in the ultraviolet region of the spectrum in the wavelength range of 0.337 μm.

Element that take part in video and photo - not in a sale, so you can be calm I didn't damaged it with not regular using. That was to demonstrate and left for my own experiments.

Anode current, pulse (peak value), A - not less than 200

Pulse repetition rate, imp/s - nominal 100+-10

Average output power, mW - not less than 3

Radiation pulse energy, μJ - not less than 30

Radiation divergence, rad - no more than 3 * 10 in 3

Radiation pulse duration, ns - nominal 10+-2

Radiation beam diameter, mm - no more than 3

Anode current pulse duration, ns - nominal 40+-15

Minimum operating time, h - not less than 2000


Notes. The average power was measured at a pulse repetition rate of 100 pulses/s. The radiation wavelength of 0.337 µm is a physical constant for this type of product and cannot be measured.


The product is intended for operation in normal climatic conditions.

Working position of a product - horizontal. The product can also be used in a vertical position.


Specifications


Weight - no more than 450 g

Overall dimensions - no more than 535x60 mm

These parameters are provided at anode pulse current (peak value) - not less than 200A

anode current pulse duration 40+-15 ns

pulse repetition rate 100+-10 imp/s


The polarity of connecting the leads of the active element to the contact posts of the emitter is arbitrary.
The active element is filled with spectrally pure nitrogen.
To regenerate the working gas during the operation of the active element, a nitrogen generator is provided, soldered into the reserve cylinder of the laser active element.