Replacement aftermarket vinyl decals available in colour choices.

These are made to order, returns are not accepted.

Please note these decals are not OEM however they are manufactured using high quality monomeric vinyl.

The decals come with clear transfer tape applied for easy fitting and external application.

Application instructions 

Make sure you prepare and clean the surface properly for best adhesion ideally with rubbing alcohol to clean the surface from greased oils. 

Do not use solvents, washing up liquid, window cleaner or other ammonia based cleaners or soaps. 

Make sure the surface is completely dry.

Peel away the paper backing paper slowly, making sure the vinyl decal stays on the transfer tape.If the decal starts to move away from the tape lay the decal on a clean flat surfaced rub the decal down then slowly remove again.

Do not touch the adhesive side of the decal.

Carefully position and apply the decal to the surface using an old credit card or something similar to flatten and apply the decal. 

Let it stick onto the surface for about 5-10 minutes to allow the adhesive to work.

Do not try to lift and reapply the decal.

Carefully remove clear transfer tape by peeling it away at a 45 degree angle. Peel it away slowly, making sure the vinyl decal stays adhered to the surface.

We can not be held responsible for poor application and preparation.