『Ger』 4 Axis Motion CNC Controller Mach3 USB Driver Stepper Motor Breakout Board
for CNC Router Engraving Milling Machine
| |||||||||||||||||||||||||||||||||||||||
Package include
- 1× 4-Axis USB Mach3 CNC control board
- 1× USB Cable
- 1× CD disc include the user manual & software
Mach3 USB Motion Card STB4100 V2.11.2.Software license application:Copy license files “Mach1Lic.dat” from “mach3 software folder”,to C:\Mach3 Cover theoriginal file,Reset Computer（must reset the computr,please don't open the software dircetly!）Way above the license for DIY or study purposes only, not for commercial use.1.3. Installation the software of the USB motion card:This USB motion card does not need install any USB driver,Windows2000/XP/Windows7,candirectly identify.1.3.1 Connecting the USB cable to the PC and the motion card:The first installation of motion control card, take about 10s, when the green led lights on motioncontrol card, indicating that the connection is successful, return the following tips when youinstall on your computer
Features:
1) Support for 4 axis linkage, you can connect four stepper motor drivers or servo drivers;
2) The card can be used what all Mach3 can run! Replacing of NC Studio system perfect alternative.
3) Maxinum step-pulse frequency is 100Khz, which is suitable for the servo motor or stepping motor.
4) Support automatic probe tool
5) Support emergency input
6) Support limit switch
7) Support for connecting electronic handwheel
8) Need sue external 24V DC power supply to isolate USB and external port, and to make the system more stable.
9) Have 0-10V output port, you can use Mach3 software to control the spindle motor speed.
10) 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to sero and other device.
11) 4
general-purpose isolated relay drive outpue interface, can drive for
relays for controlling the spindle starts, forward rotating and reverse
rotating, pumps and other device.
12) 1 status LED, indicate connection status on the board.
Mach3 USB Motion Card STB4100 V2.11.2.Software license application:Copy license files “Mach1Lic.dat” from “mach3 software folder”,to C:\Mach3 Cover theoriginal file,Reset Computer（must reset the computr,please don't open the software dircetly!）Way above the license for DIY or study purposes only, not for commercial use.1.3. Installation the software of the USB motion card:This USB motion card does not need install any USB driver,Windows2000/XP/Windows7,candirectly identify.1.3.1 Connecting the USB cable to the PC and the motion card:The first installation of motion control card, take about 10s, when the green led lights on motioncontrol card, indicating that the connection is successful, return the following tips when youinstall on your computer
Features:
1) Support for 4 axis linkage, you can connect four stepper motor drivers or servo drivers;
2) The card can be used what all Mach3 can run! Replacing of NC Studio system perfect alternative.
3) Maxinum step-pulse frequency is 100Khz, which is suitable for the servo motor or stepping motor.
4) Support automatic probe tool
5) Support emergency input
6) Support limit switch
7) Support for connecting electronic handwheel
8) Need sue external 24V DC power supply to isolate USB and external port, and to make the system more stable.
9) Have 0-10V output port, you can use Mach3 software to control the spindle motor speed.
10) 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to sero and other device.
11) 4
general-purpose isolated relay drive outpue interface, can drive for
relays for controlling the spindle starts, forward rotating and reverse
rotating, pumps and other device.
12) 1 status LED, indicate connection status on the board.
Features:
1) Support for 4 axis linkage, you can connect four stepper motor drivers or servo drivers;
2) The card can be used what all Mach3 can run! Replacing of NC Studio system perfect alternative.
3) Maxinum step-pulse frequency is 100Khz, which is suitable for the servo motor or stepping motor.
4) Support automatic probe tool
5) Support emergency input
6) Support limit switch
7) Support for connecting electronic handwheel
8) Need sue external 24V DC power supply to isolate USB and external port, and to make the system more stable.
9) Have 0-10V output port, you can use Mach3 software to control the spindle motor speed.
10) 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to sero and other device.
11) 4 general-purpose isolated relay drive outpue interface, can drive for relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.
12) 1 status LED, indicate connection status on the board.
Return&Refund
1.Any reason required for all refund.Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost.
2.When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos,we will help you to solve any problems.
Contact
1.If you are not satisfied, please contact us to resolve any issues. Please do NOT leave negative feedback without asking for help. We work hard to make sure EVERY CUSTOMER 100% satisfaction.
2.For any inquiries,issues or assistanceplease contact us via eBay or leave your mail address.
3.All emails will be answered within 1-2 working days.If you do not receive our reply,please kindly re-send your email and we will reply to you as soon as possible.