eBay

Odroid Vu8M 8-inch Capacitive Touch TFT LCD for Odroid M1

The ODROID-Vu8M is compatible with the ODROID-M1. This is an 8-inch Capacitive Touch TFT LCD you can use to build a Human-Machine-Interface (HMI) device with the help of Odroid M1.

The Odroid Vu8M Touch LCD has 4-Lane MIPI – DSI support. The box includes mounting accessories, FPCB cables, and MIPI – DSI converter board.

Specifications of ODROID Vu8M TFT Capacitive Touch LCD

Touch Type: Capacitive | 5-Finger Touch Input
LCD Type: Thin-Film-Transistor (TFT)
Display Size: 8-inch
Hardware Resolution: 800 x 1280 pixels
Screen Dimensions (Active Display Area): 17.22cm x 10.76cm | 172.224mm x 107.64mm
Power Consumption: 2.4W (± 10%) | 100% Duty Cycle

ODROID-Vu8M Form Factor (Unit – mm)

Odroid Vu8M dimensions Odroid Vu8M form factor

Items Included

A. 8-inch Assembled TFT LCD with Touch Panel
B. M3*40 – Blots - Black (x3)
C. PM3.0*7 Bolts – Black (x11)
D. FPCB Cable 60mm (x2)
E. MIPI - DSI Convertor Board for Odroid M1
F. LCD Bracket Board for Odroid M1
G. U Shape Bracket Board for Odroid M1 (x2)

ODROID-M1 4GB and ODROID-M1 8GB are sold separately.

Steps to Fit Odroid Vu8M Display with Odroid-M1

Fit the U-Shaped Bracket Boards to the back of the ODROID-M1.
Secure the bracket boards using PM3.0*7 blots.

Fit the U-Shaped Bracket Boards (with the pre-fixed Odroid M1) to back of the Odroid Vu8M LCD.
Secure with the help of the PM3.0*7 bolts.

Plug and fix the 60mm 31-Pin FPCB cable of the MIPI converter on the Odroid M1.
The convertor board receives the touch signals from the LCD using this FPCB cable.
Make sure to carefully undo the clamp before you insert the cable.
Make sure to properly secure the ribbon in its place by pressing the clamp.
Check the connection between the 31-Pin and 6-Pin FPCB cables.
Touch Screen 3.5mm (6-Pin) | LCD: 60mm (31-Pin)