SpeedFactory Billet B-Series Crankcase Pressure Port Fitting
Are you monitoring crankcase pressure levels on your race car? If not you should be!
Monitoring your crankcase pressure levels gives you valuable information about your engine's state of health & piston ring to cylinder wall sealing, and is highly recommended - especially on turbocharged cars that develop high levels of blow-by and crankcase pressure.
The SpeedFactory Billet B-Series Crankcase Pressure Port Fitting was designed specifically for use on Honda/Acura B-Series engines to plug the OEM "black box" breather port and provide a location that is directly in the crankcase to install a 1/8? NPT pressure sensor, giving accurate pressure readings during engine operation.
- Precision CNC machined from 6061-T6 billet aluminum
- Black Anodized finish adds durability and eliminates corrosion
- Precise fit w/dual O-rings provides a tight, leak free seal & dampens vibrations to the sensor
- 17mm wrench provision for easy tightening with integrated 1/8? NPT pressure sensor port
- Laser-etched SpeedFactory Racing logo
You can combo this part with your choice of AEM pressure sensor in the drop down menu above. Sensors come with a 3-wire mating connector with 12" leads for ease of installation. There is no difference in functionality between brass or stainless sensor bodies.
Sensor is available for purchase upon request.
NOTE: All Standalones and most factory based EMS such as Hondata etc support an auxilary 0-5v sensor input such as the commonly used 0-75 and 0-150psig pressure sensors.
Installation Notes: We recommend thoroughly cleaning the port in the block and the fitting with brake cleaner prior to installation, and then liberally coating it with HondaBond or Permatex Ultra Grey and allowing it to cure for 24hrs before use. This will act both as lubricant to facilitate installation and then will setup and bond the fitting into the block so that it doesn?t blow out in the case of abnormally high crankcase pressures such as during the event of a piston failure.
SpeedFactory Racing Titanium VTEC Eliminator Pin Kit for Honda B Series
Gain the advantages of increased oil pressure (~12psi) & reduced valvetrain weight with this product.
-8 Pins for locking VTEC on all B Series VTEC engines
-Lightweight Titanium, 37% lighter than stock pins (7.5g per rocker assembly)
-VTEC solenoid can be left in place, or a block off plate can be utilized
-LMA's can be left in place, or be removed
-Used in both the Competition Clutch Civic and the Vibrant Performance Civic in combination with Skunk2 Pro Series Cams
Please allow 2 weeks for delivery!
- See more at: http://speedfactoryracing.net/collections/speedfactory-parts/products/speedfactory-racing-titanium-vtec-eliminator-pin-kit-for-honda-b-series#sthash.HHzdpEqm.dpufAbout Us
SpeedFactory LLC. was founded by 2 passionate members back in 2006 and has quickly grown into our current 10 person operation with a 10,000 sq. foot retail parts store & race shop. The main goal behind SpeedFactory Racing was to develop a trusted local business and also build some of the fastest cars in the nation. We are proud to say that we have accomplished that and have grown into a premiere global supplier of racing components to both performance shops and retail customers alike. We take great pride in all of our work and our relationships with our customers, and look forward to working with you!
Payment
Buyers who pay with unconfirmed addresses will not be accepted. Those that purchase with an unconfirmed address will be contacted and will be asked to cancel their bid; a refund in full will be issued. We refuse to service Paypal unconfirmed shipping addresses to prevent fraud on eBay. We do this at the recommendation of both Paypal and eBay. We are following their policies on how to best protect both us, the seller, and you the buyer.
Shipping
For our Continental USA Customers: We typically ship FedEx Ground, UPS Ground, US Postal Service (USPS) Priority Mail, and USPS 1st Class Mail, 100% at our sole discretion. Due to how the automated eBay system works, sometimes our auction may specify (for example) FedEx Ground. However, we may actually ship your product with UPS or the USPS instead. If you require a specific type of shipping, or a specific courier, please contact us before purchasing this part. We will be happy to work with you to ship as you need. For our non-Continental USA Customers: We typically ship US Postal Service (USPS) Priority Mail or USPS 1st Class Mail. We typically have flat rate and affordable shipping rates to Hawaii, Alaska, and all US Territories. Due to how the automated eBay system works, sometimes our auction may specify (for example) FedEx Ground. However, we may actually ship your product with UPS or the USPS instead. If you require a specific type of shipping, or a specific courier, please contact us before purchasing this part. We will be happy to work with you to ship as you need. For our International Customers: We typically ship US Postal Service (USPS) Priority Mail, USPS 1st Class Mail, FedEx International Economy, or DHL. We typically have flat rate and affordable shipping rates to over 200 countries! We reserve the right to ship via our choice of courier. If you require a specific type of shipping, or a specific courier, please contact us before purchasing this part. We will be happy to work with you to ship as you need.
Terms
All sales are final. Items will not be shipped until payment is made in full using one of our payment methods listed under the Payments tab.
Returns
Returns not accepted unless pre-approved by an authorized SpeedFactory representative. Please contact us by phone or email to discuss if you have a question about returns that is not answered here.
