High-slope pentodes for high-frequency broadband voltage amplification in the input stages of electronic devices. Design - in a glass shell, miniature. Weight 15 g.
Parameter | Terms | 6Zh9P | 6Zh9P-E | E180F | Unit rev. |
Analog | — | E180F, 6688 | — | — | — |
Filament current | — | 300±30 | 300 +20 -25 | 300 | mA |
Anode current | — | 15±4 | 15±4 | 11.5 | mA |
at the beginning of the characteristic at U c1 = -8 V | ≤10 | ≤10 | — | μA | |
Second grid current | — | ≤4.5 | 2.4 +0.6 -0.8 | 2.9 | mA |
Reverse current of the first grid | at U c1 = -2 V | ≤0.3 | ≤0.2 | 0.5 | μA |
Leakage current between cathode and heater | — | ≤20 | ≤15 | — | μA |
Slope | — | 17.5±3.5 | 17.5±3.5 | 15.9 | mA/V |
U n \u003d 5.7 V | ≥11 | ≥12 | — | ||
Internal noise resistance | — | 150 | 100 | 90 | kOhm |
Equivalent noise impedance | — | 0.35 | 0.35±0.25 | — | kOhm |
Input impedance | at f = 60 MHz | 5 | 5 | — | kOhm |
at f = 100 MHz | — | — | 2 | ||
Vibration voltage | at R a = 700 Ohm | ≤70 | ≤40 | — | mV |
Interelectrode capacitances | input | 8.5±1 | 7.8±0.8 | 7.5 +0.9 -1.1 | pF |
day off | 3±0.5 | 2.7±0.8 | 3.5±1 | ||
checkpoint | ≤0.03 | 0.02-0.03 | 0.03 | ||
cathode heater | ≤7 | 4.5-6.5 | — | ||
Operating time | — | ≥2000 | ≥5000 | 10000 | h |
Criteria for evaluation | |||||
Reverse current of the first grid | — | ≤1.5 | ≤2 | ≤1 | μA |
Slope | — | ≥11 | ≥11 | ≥11 | mA/V |
Slope change | — | ≤±25 | ≤15 | — | % |
Parameter | Terms | 6Zh9P | 6Zh9P-E | E180F | Unit ism |
Heating voltage | — | 5.7-7 | 6-6.6 | 6-6.6 | AT |
Anode voltage | — | 250 | 160 | 210 | AT |
with the lamp off | 285 | 285 | — | ||
when turned on | — | — | 400 | ||
Voltage of the second grid | — | 160 | 150 | 175 | AT |
with the lamp off | 285 | 200 | — | ||
when turned on | — | — | 400 | ||
Negative voltage of the first grid | — | 100 | 100 | 100 | AT |
Voltage between cathode and heater | at positive heater potential | 100 | 100 | 60 | AT |
at negative heater potential | 150 | 100 | 60 | ||
cathode current | — | 35 | 22 | 25 | mA |
Power dissipated by the anode | — | 3 | 3 | 3 | Tue |
Power dissipated by the second grid | — | 0.75 | 0.45 | 0.9 | |
Resistance in the circuit of the first grid | — | one | 0.5 | 0.5 | MOm |
Bulb bulb temperature | — | 130 | 130 | 155 | °C |
Resistance to external influences | |||||
Acceleration | at vibration with a frequency of 5-600 Hz | 6 | 6 | — | g |
with multiple hits | 75 | 150 | — | ||
in single strikes | — | 500 | — | ||
permanent | — | 100 | — | ||
Ambient operating temperature range | — | -60…+150 | -60…+100 | — | °C |