Fitment - Please note all bike models may not be listed below. To find the correct servo buddy for your bike please look up your bike in the Fitment Guide below then type the servo buddy code into our search bar.
Click here to see Servo Buddy fitment guide
Suzuki C 42-1730
GSXR1000 17-18
The Servo Buddy is a small, light weight servo fix that eliminates the need for the exhaust servo motor, which is not needed with any aftermarket exhaust system. These devices are typically called EXUP valves, SET valves or exhaust servos. Typically when you purchase an aftermarket exhaust, a small plate is included to bolt onto the top of the exhaust servo. The purpose of this plate is to restrict the servos movement so the bikes computer still thinks the exhaust valve is connected and working correctly, preventing the FI (fuel injection sometimes mistakenly called the F1) fault light from illuminating on the dashboard.
The problem with these plates is they require you keep the servo motor installed, taking up a lot of valuable room that could be used for power commanders, traction control computers, quick shifters, or a huge variety of other accessories. Additionally, the servo motor is dead weight, providing no benefit. After all, half the benefit of that fancy exhaust system was to drop weight, right!
The servo buddy uses OEM connectors and easily snaps into place replacing the bulky servo motor. It can be zip-tied to the wire harness and takes up virtually no space. The body is shrunk wrapped rather than encased in a housing to provide the smallest footprint possible while blending into the factory wire loom. It works by electrically mimicking the working exhaust servo so the computer thinks all is well with the exhaust circuit preventing the FI light from coming on due to exhaust faults while still keeping the lights other functionality to warn you if anything else is wrong with the bike! Simply disconnecting the FI light or putting tape over it could mask potentially serious problems and lead to a damaged engine.
To provide a reliable long service life, all parts were spec'd out to meet military or automotive standards meaning the device is tolerant to a wide temperature range. Additionally, the entire circuit board has been encased in a thick epoxy potting compound to provide protection from moisture and vibration. It will be EXTREMELY reliable under all conditions, whether your ride street, race, track, or adventure ride.
Please Note: If you are unsure if this will fit your bike, unplug your servo motor check the connector/s and compare them to the pic provided. If you are still unsure please contact us before ordering as we can not be held responsible if the incorrect servo buddy is ordered.
This is a genuine product, beware of imitations!
Please Note: Servo Buddys are for "race use" and may violate local emissions laws if installed and used on a street-registered motorcycle.
Servo Buddy weight = 20grams (0.6oz)
We are an Australian-owned and operating business
PICK UP
Pickups are currently not available. All products are shipping only during COVID crisis.
Our Contact Details:
If you wish to call us to ask a question about this product, or to arrange pickup,
Via Desktop - click on "Contact seller" towards the top right of this page. Then click "Other" and you will be able to view our contact phone number.
Via Mobile App - Scroll down and click the Right Arrow next to "About the seller", then click "Call Seller" to view our contact phone number.
PLEASE CALL PRIOR TO ARRANGE PICK UP
Check out our full range of quality Motorcycle Race Products at Motospares / Roost Industries
SHIPPING
SHIPPING DELAYS DUE TO PANDEMIC: Please note that Aust Post are suffering from long delays due to Lock Downs and Limited Workforce. We will not be held responsible for postage delays caused by Pandemic restrictions. Ebay delivery estimation times are 100% incorrect and do not take into account delays caused by the pandemic. If you want your items delivered quickly please order with EXPRESS POST. If you order with regular shipping service or surface mail you will NEED TO BE PATIENT as delivery times may be 1 to 4 weeks.
All items are normally shipped within 24 hours or first business day of purchase.
Please note: where possible we ship using Australia Post. A signature is not normally required with Australia Post shipments, however some large and/or bulky items may require a signature. If you are not going to be home and want your item left without signature, please leave instructions with us "Authority to leave" and a suggested safe location to leave the item that is easily accessible by the postal delivery worker. If you choose this option we will not be responsible for items that go missing.
Please note: some smaller low value items such as Dzus Fasteners, Swingarm Spools and gloves we ship via regular Surface Mail that does not have tracking. We do this to save our customers money on higher postal fees for tracked services. If you require tracking on your order then please feel free to pay the extra shipping cost for an express service with tracking. Otherwise please remain patient and allow enough time for your order to arrive via regular surface mail shipping.
Please note: some orders in "non metro" locations that are shipped via Aust Post Regular Shipping can take up to 10 working days to be delivered regardless of what Ebay or Australia Post say on their shipping estimations. Whilst we always ship our orders in a timely manner, delays due to Aust Post slow shipping can happen. If you are in a non metro area we advise that you select an express shipping option if you require the item to be delivered quickly.
INTERNATIONAL SHIPPING
If you are shipping an item from us in Australia to an international location please keep in mind that there may be import taxes and duty charges that you may be required to pay when the item arrives in your country before the item is released to you from your local customs. You need to make sure you are aware of any import taxes and/or duties applicable to your order before you purchase.
We are not responsible for any import taxes or duty fees you may be charged by your local government, or delays in delivery times caused by your local customs holding shipments until duties are paid.
Some things to note:
If you receive merchandise that you are unhappy with for any reason, PLEASE DO NOT LEAVE FEEDBACK - CONTACT US FIRST AND GIVE US A CHANCE TO RESOLVE IT, we will sort it out for you.
Any item that is ordered incorrectly by the buyer can be returned for exchange or refund at the buyer's request and expense, as long as it is returned in the condition that it was received, in the original packaging, unopened/undamaged, with tags. If the item was incorrectly ordered, we will refund you the original amount minus our shipping costs to you and a $5.00 restocking fee.
Items that are faulty, damaged or miss-picked by us (wrong size, colour, etc) will be replaced at our expense.
All items returned for refund or exchange must be returned in the original condition with tags attached (unless faulty). Any packaged goods must be returned with the packaging in its original condition or may not be accepted (unless faulty). Please see the list below for things to avoid ensuring your return is accepted
Please use due diligence in checking hard parts for correct fitment before removing from the packaging. Items, such as chains will not be accepted once they have been removed from their clear plastic packages. You should usually be able to compare the new item with old/broken item while it is still in the manufacturers packaging. We do understand that this is unavoidable in some circumstances.
Please ensure all returned clothing items are free from marks, stains and rips as they may not be accepted for return if received damaged (unless faulty).