3040 CNC Router Small 3040Z-DQ 300W DC Spindle Milling Machine Ballscrew Frame

Good News:

1. We have Germany Warehouse located in Germany,so we will ship this product from Germany to you.

2. We will ship this product by DHL to you,very fast shipping time!

4. Our products are packaged well and in good protection,pls rest assured to buy!

ship from Germany by DHL to the following Europe Countries
Austria	Belgium	Bulgaria	CzechRepublic	Denmark	Estonia	Finland
Finland	Germany	Greece	Hungary	Ireland	Italy	Latvia
Liechtenstein	Lithuania	Luxembourg	Monaco	Netherlands	Poland	Portugal
Romania	Slovakia	Slovenia	Spain	Sweden	Switzerland	UK

Estimated delivery time:

1-2 days to: Germany
2-4 days to: Austria,France,Spain and Italy
3-5 days to: UK
4-5 days to: Other Europe Countries

Package included:

1 x 3040 CNC Router Milling Engraving Machine Frame Kit

1 x 52mm spindle clamp mount

1 x 300W DC Spindle motor ER11

1 x Speed regulator

(without stepper motor & control box & cable chain carrier), if you need pls contact me.

100% Brand New and High Quality!!!

3040+300W+-1

1. 3040 CNC router milling machine mechanical kit ball screw

Technical Parameters

1) Machine Dimensions: 540×410×320mm (not including the coupling and motor)

2) Table size: 525x320mm,Groove width: 7.5mm

3) Rack material:6061-T5,high strength, through the CNC machining center precision machining, all of the surface after anodic oxidation treatment.

4) 3Axis effective stroke: X290mm, Y390mm, X60mm

5) Z-axis Stroke:55mm,Engraving depth depends on the length of the tool edge

6) Max workpiece thickness:≤70mm

7) Rail type: Chromeplate shaft+Linear Bearings(Surface hardening 61HRC)

8) Transmission unit: X axis diameter 16mm chrome plated linear guide, TBI1204 ball screw;Y axis diameter 16mm chrome plated linear guide, TBI1204 ball screw;Z axis diameter 12mm chrome plated linear guide, TBI1204 ball screw;

9) Repeat positioning Accuracy: 0.05mm

10) Net weight: 17.5kg

3040-4

3040-5

Feature:

1) Simple operation and installation.

2) More steady and strong equiped with aluminum alloy frame materials.

3) X Y and Z axis carving make more precise and and three-dimensional effect.

4) Can control the engraving more precise

5) Engrave almost anything on almost any surface

6) Cover plates reducing pollution for the screws and shafts.

7) The reinforced and thickened machine body make transportation absolutely to be safer and longer life time.

8) The chrome shafts is not easy to deform,suitable for long time use.

9) Flexible coupling can be used for high torque transmission.

10) This item already be equiped NEW 1204 ball screws. Anti-blackflash,high precision,long life circle.

2. Spindle Motor:

Work voltage: 12-48VDC

Rotation speed: 2000-12000r/min

Power: 300W

Torque: 230mN.m

Insulation resistance:>2Megohm

Dielectric strength:400V

Motor Length: 175mm

Diameter: 52mm

Axis collet Length: 48mm

Diameter of Axis Collect holder: 16mm

Repeat accuracy: 0.01-0.05mm

ER11 collect: 3.175mm 1/8"

3. DC Speed regulator for 300w spindle motor

1) Can support AC and DC input. There is no power supply polarity problems.

2) Ultra-high voltage scope. DC support 15-160V Input, AC support 12-110V input.

3) Large radiator with mounting holes.

4) High power control, support 10A current.

5) Except the on-board PWM speed regulation, it also support outward PWM signal input to achieve speed regulation. The requirement for outward PWM signal input speed regulation: Accumulator 3.5-12V VPP, frequency 1K-10KHZ. This feature is very suitable for spindle speed regulation via MACH3 .

6) Supports a wide range of motors. Basically all on the market into a letter drive DC motor speed control. As long as the DC resistance of the motor is greater than 2 ohms DC resistance can be. Special attention, the driver can not be less than 2 ohms DC resistance of DC motor to speed control.

7) Equipped with a fuse, better protection performance.

8) Installed with power led for easy operation.

300W -1

Main application:

Engrave for Wood,bamboo,normal PCB,PVC,PMMA,plastic,bamboo,duotone board(ABS)and etc nonmetal,also can engrave on gold,silver,copper,aluminium,Pb etc soft metal surface working,but not milling working.

Feature:

1) Simple operation and installation.

2) More steady and strong equiped with aluminum alloy frame materials.

3) The engraving process is visible as controlled by computer

4) X, Y and Z axis carving make more precise and and three-dimensional effect.

5) Can control the engraving more precise

6) Engrave almost anything on almost any surface

7) Emergency stop button enhance security

8) Cover plates reducing pollution for the screws and shafts.

9) The reinforced and thickened machine body make transportation absolutely to be safer and longer life time.

10) The chrome shafts is not easy to deform,suitable for long time use.

11) Flexible coupling can be used for high torque transmission.

12) High Precision Stepping motor makes engraving more precise .

13) This item already be equiped NEW 1204 ball screws. Anti-blackflash,high precision,long life circle.

Payment
We accept payment through PAYPAL only.

Shipping
1.Items will be shipped within 1-2 days upon the receipt of payment.
2.Please check out your address carefully when processing order.We are not responsible for wrong or undeliverable address.
We will ship item to your PAYPAL address. If other address, please advise us by eBay or E-mail.
3.The estimated delivery time is 7~15 workings days to Asian, USA, AU, UK and most western European countries;
15~30 workings days to most other countries.

Return&Refund
1.Any reason required for all refund.Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost.
2.When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos,we will help you to solve any problems.