|
|
iShoot Dual-camera Synchronous Undamped 360° Cantilever Gimbal
Tripod Crane Head IS-XB02--- Support Vertical Shooting Suitable for 100-400/150-600 Telephoto Lens |
| Features: |
|
1. The cantilever gimbal does not have a quick release plate. The measured volume is about 95mm long x 85mm wide x 115mm high. Two multi-functional clamps are used respectively. The two clamps cannot be rotated independently, but can only rotate synchronously. The clamps are compatible with ARCA -SWISS/RRS structural quick release plate, also compatible with Manfrotto 200PL/410PL structural quick release plate, as well as lens replacement foot or tripod mount ring using same standard; 2. The cantilever head has four built-in metal bearings, of which two cantilevers have a built-in metal bearing respectively; the top adopts a large locking knob, which can realize non-damping rotation; 3. The base has two built-in metal bearings, no damping design, and can rotate freely at 360°. The diameter of the bottom of the gimbal is about 60mm, and it adopts 3/8 screw holes; 4. The net weight of the entire gimbal is about 780g, and the maximum load is about 10 kg. The gimbal does not have a quick release plate, and only supports the lens tripod ring with quick release plate function. If the lens tripod ring does not have a quick release plate function, please Replace it with a tripod ring with quick release plate function, otherwise it cannot be installed and used normally; 5. The cantilever head is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold. |
| Scope of application: |
|
(The lens needs to have a tripod mount ring with quick release plate feature, it cannot be used without such tripod ring) Sigma 105mm F1.4 DG HSM Art Sigma 70-200 F2.8 DG OS HSM Sport Sigma 100-400mm F5-6.3 DG DN OS (E-mount/L-mount) Sigma 60-600mm F4.5-6.3 DG OS HSM Sport Tamron SP 70-200mm F2.8 Di VC USD G2 Tamron 70-210mm F4 Di VC USD Tamron 50-400mm F/4.5-6.3 Di III VXD Tamron 100-400mm F4.5-6.3 Di VC USD Tamron 150-500mm F5-6.7 Di III VC VXD Tamron SP 150-600mm F5-6.3 Di VC USD G2 Fujifilm XF 200mm F2 R LM OIS WR Fujifilm XF 150-600mm F5.6-8 R LM OIS WR |
| Package Including: |
|
1 x iShoot Dual-camera Synchronous Cantilever Gimbal IS-XB02 (The other items in the photos not listed here are for illustrating only, not included) |
|
|
|
|
Metal Lens Collar Support Tripod Mount Ring IS-TA140
for Tamron 100-400mm f/4.5-6.3 Di VC USD(A035) Lens, Bottom is ARCA Fit Quick Release Plate Feature Compatible with Tripod Ball Head of ARCA-SWISS / PMG Fit |
| Features: |
|
1. The lens collar is made of aviation aluminum, CNC precisely machined, hollow-out weight reduction design, surface polished and anodized, with stainless steel screw; 2. Adopt the standard of original factory, with 3M film inside, inner diameter is about 81.5mm, width is about 18mm; bottom is added quick release plate feature, plate length is about 90mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screw, net weight is about 180g; 3. Suitable for Tamron 100-400mm f/4.5-6.3 Di VC USD(A035) lenses; 4.Bottom quick release plate is AS standard, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca fit, suitable for IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK clamp. |
| Package Including: |
|
1 x iShoot Tripod Mount Ring IS-TA140 for Tamron 100-400mm f/4.5-6.3 Di VC USD(A035) Lens (The other items in the photos not listed here are for illustrating only, not included) |
|
|
