INTBUYING 35.4"Countertop Refrigerated Cake Pie Display Cabinet 220V Curved Glass Rear Sliding Door Yellow LED Lighting Beveled Bottom

1.Air patenting Cake Display Cabinet designed with trend of hoover flair and unique style. The body of cabinet structure with contact box. It will display visual. Features of refrigeration compressor are small noise, low power consumption, fast cooling, sterility, temperature uniformity, and other advantage.

2.Attractive interior LED lighting. Digital temperature controller and display.
3.Front facing glass, glass windows on both sides. 
4.Heating wire defogging glass. Equipped with rear sliding door.

5.Air patenting Cake Display cabinet application for store, supermarket, hotel, market, ect. It also can extend display cycle of vegetable, food, beverage, cooked food, candy, cake, cosmetics.

https://topseller365.com/data/prd/210/155/5.jpg
https://topseller365.com/data/prd/210/155/1.jpg
https://topseller365.com/data/prd/210/155/3.jpg
https://topseller365.com/data/prd/210/155/7.jpg

https://topseller365.com/data/prd/210/155/13.jpg

 

Name  

Cake Display Cainet

 

Power 225W
volume 102L Voltage 220V
Shelf Size 30.3*9Inch (77*23cm)

30.3*7.48Inch (77*19cm)

Refrigerating Fluid R290
Ambient Temperature 35.6℉-46.4℉

(2℃-8℃)

Refrigeration Size 36.43*19.3*30.3Inch (90*49*77cm)
 
Note: The ambient temperature is measured at room temperature and humidity are 23℃ and 50% when the machine has been working for about 4 hours.Depending on the working environment, we only guaranteed that the ambient temperature within the temperature range and DO NOT guaranteed reached minimum temperature.

Products cannot be placed on the air inlet duct and the air outlet duct. Placing products will easily block the air duct. No air will cause the evaporator to freeze and block. The temperature of the cabinet is too high, which is higher than the normal temperature range displayed on our website.

The cooling of the machine is normal when the machine temperature is in the range of 2-8℃.

 

Precautions

1. Please do not turn on the defogging switch frequently (turn it on when there is fog, and turn it off when there is no fog). Frequent turning on may cause the temperature to remain high.
2. Please be sure to clean the radiator once a month or so to improve the cooling speed.
3. Do not block the air inlet of the return air outlet in the cabinet and the cooling air outlet outside the cabinet.
4. The intelligent temperature control has been adjusted accurately before shipment, do not adjust it without authorization, please contact us if necessary.
5. When the machine is cooling, a small amount of fog will appear in the cabinet for a short time when the cabinet door is opened. This is a normal phenomenon, and it will disappear after closing the cabinet door for about a minute.
6. The defogging function is the electric heating defogging of the three-layer glass of the front glass, which basically does not fog. The side glass door and the rear door glass are double-layer insulating glass, and occasionally there will be a small amount of fog when the weather is humid. This is a normal phenomenon, and this phenomenon will disappear when the air conditioner is turned on or the air flow is accelerated.

Matters needing attention when using

1. When handling, the box should be kept as straight as possible, the maximum inclination should not exceed 45 °C, and it should not be placed upside down or horizontally;

2. Placement of the freezer: It should be placed in an environment with smooth air, cool and dry, and no corrosive gas around it. Remember to be close to the heat source and avoid direct sunlight. The front and rear of the cabinet should be kept more than 10cm away from the wall. The cabinet is stable to avoid vibration or excessive noise;

3. The frozen storage time of food is limited and cannot be stored for a long time, otherwise the freshness and moisture will be lost. Food should be placed in the cabinet with a certain distance to facilitate smooth air and uniform temperature;

4. The freezer can be turned on after 5 minutes of installation and shutdown. Do not turn it on after it has been shut down. For the first use or after a period of shutdown, the empty cabinet should be run for about 2 hours, and then put in food;

5. Defrosting: When the frost layer is more than 5mm thick on the surface of the freezer evaporator, it will affect the cooling effect and must be defrosted in time. When defrosting, the power supply should be cut off. Open the door and use the ambient temperature to defrost; if you need to speed up the defrosting, you can put an appropriate amount of hot water into the box to defrost.

Notice. Never use sharp metal tools to remove the frost layer!

6. The fresh-keeping work surface should not be hit with hard force or cut with sharp objects, such as knives and forks, otherwise the work surface will be damaged.

7. If the ambient temperature is high, there may be dewdrops on the outside of the box. This is a normal phenomenon. Please dry it with a soft dry cloth in time.

8. In order to save electricity, the number of opening doors should be minimized and the opening time should be shortened.

9. Please clean the oil and dust on the condenser and fan regularly to ensure energy saving and the best cooling effect.

https://topseller365.com/data/prd/210/155/A.jpg
Item included:

1 PC 35.4"Countertop Refrigerated Cake Pie Display Cabinet 220V Curved Glass Rear Sliding Door Yellow LED Lighting Beveled Bottom

Shipping & Handling Details

Default Shipping Cost or Free Shipping Information: 

 Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us.
 Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information.
 
Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.

Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.

Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.

Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method.

Return / Refund

If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.

Returns & Exchanges

 All returns must be made within 30 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
 Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged. 
 Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges

 
All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.

Defective & Damaged Products 

 
If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
 Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method. 
 If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.

Payment

eCheck Issues: Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you.

Warranty & Feedback

 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
 Any warranty shipping cost to us is responsible by buyer.
 Any shipping cost to buyer is responsible by the seller. 
 
We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it's very important for us. Thanks very much.


On 4-Nov-2022 at 02:44:06 EDT, seller added the following information:

DataCaciques