Odroid GO Ultra Dim Gray 6-Core Amlogic S922X 2GiB RAM Mali-G52 GPU 16GiB eMMC

Important Note: This product cannot be shipped to Russia due to shipping restrictions in the region. The form factor of Odroid Go Ultra is similar to that of its predecessor, Odroid Go Super, however, the hardware capabilities and processing unit has been significantly improved. Odroid Go Ultra is a gaming development platform based on Amlogic S922X 6-Core ARMv8-A architecture. The hardware of Odroid Go Ultra is based on Odroid N2+. Specially Designed Split Charging Cable with USB-C and Type-A Interfaces Since the Odroid Go Ultra uses the dual PMIC architecture, the battery can take a long time to recharge once it is nearly drained out. This is why there is a need for a relatively fast charging solution. Odroid Go Ultra comes with its custom-designed split USB charging cable with USB-C and USB Type-A extensions. You can plug in the Type-A and Type-C connectors to the Odroid Go Ultra power input ports and the battery will charge relatively faster than its predecessor, Odroid Go Super. Specifications of Odroid GO Ultra Processing Unit Amlogic S922X 2GHz Cortex-A53 Dual-Core and 2.2GHz Cortex-A73 Quad-Core ARMv8-A Architecture Crypto and Neon Extensions Mali-G52 Graphics Processing Unit 846MHz 6x Execution Engines Operating System Support Ubuntu 20.04.4 | Aarch64 Kernel 4.9.277 EmulationStation Modified Front-End with Libretro OpenGL-ES GPU accelerated on DRM-FB Storage Support 16GiB onboard eMMC Micro SD Card Slot (Supports UHS-1 interface) RAM LPDDR4 2GiB RAM | 32-Bit Bus | 1608MHz Wireless Support Supports Dual-Band USB WiFi BT Combo Adapter (Sold Separately) Display TFT LCD 5-inch | Wide Angle Display 854x480 pixels MIPI DSI Interface Audio Earphone Stereo Jack 8Ω Mono speaker 0.5Watt Power Supply USB-C Power Input 5V Compatible USB Charging Cable included with USB-C and Type-A interfaces USB-C port supports USB 2.0 Device From 3 to 4 hours of charging time (OFF Status) | Up to 7 Hours (While in Use) Drawing Current up to 1.5Amp Power Consumption Less than 1mA on Power OFF Mode Game Emulation: 800mA to 1300mA (Depending on wireless usage, backlight brightness, and emulation type) Battery Li-Polymer 4000mAh 3.7V | 76.5mm x 54.5mm x 7.5mm Lasts for up to 6 hours of continuous use External I/O USB 2.0 HOST (x1) Input Buttons Function Buttons from F1 to F6 | X, Y, and A, B Analog Joystick (x2) Direction Pad Right Shoulder, Left Shoulder, Right Shoulder2, Left Shoulder2 Form Factor Dimensions – 20.4cm x 8.6cm x 2.5cm | 204mm x 86mm x 25mm Weight – 299 grams Odroid GO Ultra Block Diagram Items Included Odroid GO Ultra (Dim Gray) USB Charging Cable Dual-Band Wireless Adapter is sold separately.

Odroid GO Ultra Dim Gray 6-Core Amlogic S922X 2GiB RAM Mali-G52 GPU 16GiB eMMC

Important Note: This product cannot be shipped to Russia due to shipping restrictions in the region.

The form factor of Odroid Go Ultra is similar to that of its predecessor, Odroid Go Super, however, the hardware capabilities and processing unit has been significantly improved.

Odroid Go Ultra is a gaming development platform based on Amlogic S922X 6-Core ARMv8-A architecture. The hardware of Odroid Go Ultra is based on Odroid N2+.

Specially Designed Split Charging Cable with USB-C and Type-A Interfaces

Since the Odroid Go Ultra uses the dual PMIC architecture, the battery can take a long time to recharge once it is nearly drained out. This is why there is a need for a relatively fast charging solution. Odroid Go Ultra comes with its custom-designed split USB charging cable with USB-C and USB Type-A extensions.

You can plug in the Type-A and Type-C connectors to the Odroid Go Ultra power input ports and the battery will charge relatively faster than its predecessor, Odroid Go Super.