A big hello to all mankind! Visit my youtube channel &
and find various interesting things on Electrical ~ Mechanical and Electronic ~ Technology ...
Buying one helps my research tremendously,
helping me get all the supplies I need for the future.
This is a bedini fan motor and this has three functions!
One is the original purpose to Charging 3.7v / 6v / 9v / 12v Batteries,
the second is to be used as Efficiency Light and
the third one is to be used as a Fan with 15 red beautiful Leds.
The Bedini SSG Motor / Generator is the First REAL FREE ENERGY MACHINE
Released To The Public. It's Been Replicated By Thousands Of Independent Experimenters
All Over The World. The Bedini project is a set of plans that allows you to build a model
of a patented machine that runs from one battery, turns a wheel, charges a second battery.
John Bedini has presented a bequest to the world which can
bring back and enrich the used, abandoned batteries.
How Bedini SSG works...
Since magnets moves in the coils, a tiny electric current is stimulated into the main coils.
This activates the transistor to switch on, enabling electricity from the operated battery
to stream by way of the supplementary coils. The magnetic field generated in the secondary coils
provides the cycle a tiny lift up on its path past the coils. As the magnetic field sets off the coils,
the transistor is turned back off. This leads to the magnetic field in the supplementary coils to drop (back emf).
During this period, the vibrant electric power makes its way into the process which is emptied via a diode into
the batteries to be charged. This method demonstrated to generate additional energy on the
recharging aspect compared to the need to steer the motor.
In the method presented, the input current amounts between 10-500 mA.
Note
This is my "handmade" Bedini Fan Motor
New redesigned winding with voltage operation from 3 volts to 14 volts maximum
This device can charge small reharge batteries in capacity - maximum 7ah / 12V " also recharge and use bad
defective discarded batteries. On many occasions the battery will in fact acquire further voltage,
workable power compared to the time it had been purchased.
After a while and many rounds of charging the batteries have become superior to brand new.
Ηow to operate it
The Bedini has two pairs of two cables with Alligator Clips.
First pair is the "Red - positive / Black - negative for the Primary Battery" to run the device.
Second pair is the "Yellow - positive / Green - negative for the Charging Battery" the second battery...
"Attention"
Never put these cables in the wrong position! Because this will Damage the circuit.
Usually when this is done the potentiometer is destroyed and burned!
Τhe Potentiometer is for "increase or decrease" the charge of the battery
or the light bulb or the 15 red color leds.
Depending on the function it performed, it has different use.
When you use it to charge batteries, turned to the right is to "increase" turn to the left is to "decrease".
But you have to find the right position for the best results...
When you use it to light bulb or 15 red color leds,
turned to the right is to "decrease" turn to the left is to "increase".
There are "two switches" one is with three places, "left" for the lamp in the "middle" to charge the battery "cables with Alligator Clips "Yellow - positive / Green - negative" and the "right" for the full color leds.
The mini switch is for the resistor turn "on or off" so in the lamp you have a better spectrum when it oscillates!
When you activate this resistor it is valid for all parameters.
"Self-Oscillation function"
My circuit can make "Self-Oscillation" without moves the motor and this function
is the "best" for charging batteries or for the lighting.
Which means that the input power is the same as the output or "even higher in light intensity"
This is achieved when the resistor is activated "small switch in the position ON" and the potentiometer is in the left position.
You have to move the main switch by three positions to activate the "Self-Oscillation"
It is usually activated "First" on the lighting the main switch in the position left "Lam".
Now by moving the switch to the middle position "out" you have this "Self-Oscillation" for the battery as well.
When it is on "Self-Oscillation" and charging the battery,
turn the potentiometer "slightly to the right" to find the best performance!
See the old videos on youtube
NOTE
Maybe there are small differences in electronic components
and materials (like bigger batteries etc) due to device enhancement for the buyer's benefit!
Shipping
Registered International Shipping
The device or the item that I send you I make sure it is well protected during the shipping mission.
Delivery
Ships within 1 to 3 business days after payment is confirmed
Returns
I do not accept a returns because all devices or the items are tested and are in perfect condition before shipping.
Contact
If you have any problems please contact me with your comments, questions or suggestions by leaving me an ebay message
Leave positive feedback
If you are satisfied with my items, it would be appreciated if you leave me a positive feedback and a 5 stars rating,
this is very encouraging for me!
Thanks
~ ELEMAN ~