Functions:
acrylic bending Machine is also called plastic plate bending machine, soften and bend the plastic plate by heating.
Installation:
1. Put the main machine on a stable table
2. Insert the plug.
3. Insert two water tubes, one end of tube with copper insert stick into the water pump. The other head of both tube stick into the copper joints on the main machine.
4. 20L volume bucket or water tank, fill up with water, fix the water pump to the bottom of bucket/ tank. As below:
Operation:
1. Insert the plugs of water pump and main machine, turn on heating switch. The heating rod starts heating, cooling water starts to circulate.
2. Adjust the proper temperature according to the plate material and thickness, also adjust the heating surface controller gap to appropriate size.
3. Wait until the heating tube get red, put the material onto the worktable to heat, make sure the material just above the heating tube.
4. Bend the soft material promptly to any angle you want, cool for a while.
5. Finish, turn off the heating switch, then the pump.
FAQ:
Problem 1: No heating
Fault: Check whether the power works or not.
Solution: Make sure the power on.
Fault: Whether the temperature controller is in lowest or not.
Solution: Adjust the temperature controller to a high scale.
Fault: Whether the protective tube is intact or not.
Solution: Replace the protective tube.
Problem 2: Can not pump the water
Fault: Whether the pump has electric to work or not.
Solution: Replace the damaged pump.
Fault: Whether there is much air in the tube.
Solution: Fill up two tubes with water, dip the pump into water.
Applicable Materials:
Plastic plate: Acrylic, Plexi glass, PVC, PC, ABS, PP etc..
Application:
It is increasingly applied in school technological innovation course, decoration projects, packing of square columns or wall corners, fish tank, window edge, display counter, supermarket shelves, advertising light box, art products making, etc.
•
|