Controller IC Chip - MOFSET BQ24296M BQ24296 chip for laptop

Controller IC Chip - MOFSET BQ24296M BQ24296 chip for laptop - Ολοκληρωμένο τσιπ φορητού υπολογιστή (Κωδ.1-CHIP0335)

The bq24296M is a highly-integrated switch-mode battery charge management and system power path management device for 1 cell Li-Ion and Li-polymer battery in a wide range of smart phone and tablet applications. Its low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I 2C serial interface with charging and system settings makes the device a truly flexible solution

90% High Efficiency Switch Mode 3-A Charger • 3.9-V to 6.2-V Single Input USB-Compliant Charger with 6.4-V Over-Voltage Protection – Input voltage and current limit supports USB 2.0 and USB 3.0 – Input Current Limit: 100 mA, 150 mA, 500 mA, 900 mA, 1 A, 1.5 A, 2 A, and 3 A • USB OTG with Adjustable output 4.55 V to 5.5 V at 1 A or 1.5 A – Fast OTG Startup (22 ms Typ) – 90% 5-V Boost Mode Efficiency – Accurate ±15% Hiccup Mode Overcurrent Protection • Narrow VDC (NVDC) Power Path Management – Instant System On with No Battery or Deeply Discharged Battery – Ideal Diode Operation in Battery Supplement Mode • 1.5-MHz Switching Frequency for Low Profile 1.2- mm Inductor • I 2C port for optimal system performance and status reporting • Autonomous Battery Charging with or without Host Management – Battery Charge Enable – Battery Charge Preconditioning – Charge Termination and Recharge • High Accuracy – ±0.5% Charge Voltage Regulation – ±7% Charge Current Regulation – ±7.5% Input Current Regulation – ±3% Output Voltage Regulation in USB OTG Boost Mode • High Integration – Power Path Management – Synchronous Switching MOSFETs – Integrated Current Sensing – Bootstrap Diode – Internal Loop Compensation • Safety – Battery Temperature Sensing for Charging and Discharging in OTG Mode – Battery Charging Safety Timer – Thermal Regulation and Thermal Shutdown – Input and System Over-Voltage Protection – MOSFET Over-Current Protection • Charge Status Outputs for LED or Host Processor • Maximum power tracking capability by input voltage regulation • 20-µA Low Battery Leakage Current and Support Shipping Mode • 4-mm x 4-mm VQFN-24 Package

Ελέγξτε τον αριθμό–μοντέλο της περιγραφής μας όπως και την φωτογραφία μας . 

Το chip θα το παραλάβετε σε σφραγισμένο  διάφανο σακουλάκι. Εάν αποσφραγιστεί  δεν θα γίνει αποδεκτή καμία επιστροφή. 

Βεβαιωθείτε οπτικά  ότι αυτό που σας έχουμε στείλει είναι καινούργιο και ταιριάζει με το προϊόν που έχετε παραγγείλει. 

Εάν υποψιάζεστε ότι το τσιπ δεν είναι καινούργιο ή δεν είναι όπως περιγράφεται μην το αποσφραγίσετε και επικοινωνήστε αμέσως μαζί μας.

Integrated Circuits (ICs)IC CHIP for laptop motherboards

1230912 1-CHIP0335 1-CHIP0335 Controller IC Chip - MOFSET BQ24296M BQ24296 chip for laptop - Ολοκληρωμένο τσιπ φορητού υπολογιστή (Κωδ.1-CHIP0335) Controller IC Chip - MOFSET BQ24296M BQ24296 chip for laptop - Ολοκληρωμένο τσιπ φορητού υπολογιστή (Κωδ.1-CHIP0335)

Please make sure you have advanced soldering skill to solder the chips that you will order from us. When you receive before using it, please confirm the chip you received is brand new as described,if you suspect the chip is not new or not as described. Please don't use it and contact us immediately. Once it has been used, no return will be accepted. Please check before you buy it.Thanks for your understanding.

Lead solder balls' melting point is 180?, 210?-215? is the best melting temperature.
Lead Free solder balls' melting point is 217?, 235?-245? is the best melting temperature.

The temperatures listed above are the chip's solder balls actual temperatures (they are measured by the measuring wire on theBGA machine),but not the temperatures from the BGA rework station's top bottom heat guns.

If soldering a new Lead solder balls chip with Lead Free temperature curve (profile), it will overheat the new chip.
If soldering a new Lead Free solder balls chip with Lead temperature curve (profile), it will not completely melt the lead free solder balls on the new chip.

Most of the laser head have one or twoanti-static pointto prevent static burn laser tube as a security measure. It's better to wear an antistatic wrist strap or wash your hands before welding and installation.

When using a high-grade anti-static soldering iron,you can remove the anti-static point directly, ordinary iron requires special attention, heat iron to reached soldering temperature,then remember to turn off the iron's power, prevent static of iron burn laser tube