Atlona AT-UHD-EX-70C-RX HDMI Over HDBaseT Receiver/Transmitter with Control
The Atlona AT-UHD-EX-70C-RX is an HDBaseT receiver for AV signals up to 230 feet (70 meters) over category cable with RS-232 and IR control pass-through, plus Power over Ethernet capability. It is compatible with video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V Power over Ethernet. The AT-UHD-EX-70C-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for easy installation with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
This receiver is used in commercial and applications that call for an HDBaseT receiver with a compact form factor that allows for simple mounting behind displays and at projectors. These applications will not require an AC outlet for the receiver, since the receiver is powered by an Atlona switching product. This receiver will also be used to simplify control of the AV system by working with 12 volt-based IR receivers as well as passing through RS-232 commands.
The AT-UHD-EX-70C-RX is compatible with the AT-UHD-EX-70C-TX transmitter, as well as Atlona switchers, matrix switchers, and distribution amplifiers with HDBaseT outputs. See below for a list of compatible products.
FEATURES:
- 4K/UHD capability
- Compatible with Ultra High Definition sources and displays
- Full support of 4K/UHD streaming services and playback devices
- HDCP 2.2 compliant
- Adheres to latest specification for High-bandwidth Digital Content Protection
- Allows protected content stream to pass between devices
- Supports 4K HDR10 @ 24 Hz
- Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
- Remote-powered receiver
- Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT
- Saves time and integration costs
- Bidirectional extension of both RS-232 and IR control commands
- Control signals travel over HDBaseT link for maximum control system flexibility
- Eliminates multiple cable runs between source, control system, and display
- Long distance HDMI extension
- Receives HDMI signals up to 230 ft (70m) @ 1080P and 130 ft (40m) @ 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
- Flexible Bidirectional IR control capabilities
- IR Input designed to work with 12V IR receivers for source control
- Saves control systems costs
- Rear panel I/O connectors
- Placement of ports on rear panel simplifies wire management
- Saves installation time and eliminates clutter
- Multi-channel audio compliant
- Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™
- Allows any multi-channel audio stream to be used within a professional audio system
- Field updatable firmware
- Front panel USB port provides an easy means for kit upgrades
- Ensures long term system return on investment
- Front panel Power and Link status LEDs
- LED indicators provide power and HDBaseT link status information
- Provides easy setup and troubleshooting
- Low-profile, 1 inch (25 mm) high quarter rack-width enclosure
- Easy installation into confined spaces behind displays and above projectors
- Keeps devices out-of-sight when placed in public spaces
- Included accessories
- User guide, mounting brackets, IR emitter P/N AT-IR-CS-TX
Specifications:
Resolution:
Video: 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA: 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Colorspace: YCbCr, RGB
Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0
Color Depth: 8-bit, 10-bit, 12-bit
HDR: 4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color
(Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.)
Audio:
Formats: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Sample Rate: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate: up to 24-bit
Distance:
CAT5e/6 @ 4K: up to 35 meters up to 115 feet
CAT6a/7 @ 4K: up to 40 meters up to 130 feet
CAT5e/6 @ 1080p: up to 60 meters up to 197 feet
CAT6a/7 @ 1080p: up to 70 meters up to 230 feet
HDMI IN/OUT @ 4K: up to 5 meters up to 15 feet
HDMI IN/OUT @ 1080p: up to 10 meters up to 30 feet
Signal
Bandwidth: 10.2 Gbps
CEC: Pass through
HDCP: Supports up to 2.2
Connector
Firmware: Mini-B USB
HDBaseT: RJ45 (8P8C)
HDMI: Type A
IR: 5-pin captive screw
RS-232: 3-pin captive screw
Power: PoE (Power over Ethernet) from TX
Temperature
Operating: 0°C to 50°C 32°F to 122°F
Storage: -20°C to 60°C -4°F to 140°F
Humidity: 20 to 90% non-condensing
Power
Consumption: 7.19W (10.89W when paired w/AT-UHD-EX-70C-TX)
Supply: Input: AC100~240V 50/60Hz
Output: DC 48V/0.83A
Dimension:
H x W x D: 25 x 109 x 89 (mm) 0.98 x 4.29 x 3.50 (inch)
w/ears: 27 x 119 x 89 (mm) 1.06 x 4.69 x 3.50 (inch)
Weight:
Unit: 0.33kg 0.73lbs
Certification:
Power Supply: CE, FCC, RoHS, cULus, RCM, CCC
Product: CE, FCC
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids