RTT Waterproof Sealant is a high-quality, water-based, and non-toxic hybrid liquid rubber that works by creating a watertight seal to keep moisture away from cracks, vents, holes, and joints. It can be applied with a brush, roller, or paint sprayer and stretches 1000% with 95% recovery. Designed for extreme weather, our product is durable and flexible enough to seal almost anything.

What makes our sealant the top choice?

• Highly flexible and durable. This ultra-tough waterproof sealant is highly flexible once cured. The UV-stable formulation will withstand high temps and sun exposure, leaving you with a long-lasting product that’ll still provide years of protection after installation.
• Easy to apply. Just brush or spray over your concrete, brick, or stone and you will create a waterproof barrier — perfect for DIYers who want to do the job themselves and save money on contractors.
• Safe to use. This sealant contains no solvents or VOCs, which makes it completely safe for you, your family, pets and plants. It can be used both indoors and outdoors without the toxic effects of traditional solvent-based sealants.

You can trust that it will protect your investment for many years to come. Save money, time, and energy with RTT Waterproof Sealant.

Coverage:

For metal roofs and rendered concrete apply 1.5L/m2.

• 15L Bucket covers ≈ 10m2
• 10L Bucket covers ≈ 7m2
• 4L Bucket covers ≈ 3m2
• 2L Bucket covers ≈ 1.5m2
• 1L Bucket covers ≈ 0.7m2
• 0.5L Bucket covers ≈ 0.5m2

For rough or uneven concrete apply a minimum of 2L/m2

• 15L Bucket covers ≈ 8m2
• 10L Bucket covers ≈ 5m2
• 4L Bucket covers ≈ 2m2
• 2L Bucket covers ≈ 1m2
• 1L Bucket covers ≈ 0.5m2
• 0.5L Bucket covers ≈ 0.2m2

Popular Uses:

• Metal roofs
• Concrete roofs
• Box gutters
• Tanks and Throughs
• Planter boxes
• Retaining Walls
• Sheds
• Wooden or Metal decks
• Ponds

Preparation:

Clean all surfaces free of dirt, oil, impurities and allow to dry. Water blast or wire brush any stubborn debris or rust. Prime all concrete surfaces with a quality 2 part epoxy.

Application:

Always apply RTT Waterproof Sealant to the water contacting side of the project. Apply by brush or roller up to 2mm thick per coat. Use ample product and work it into the surface and around protrusions so complete contact is achieved. RTT GEO - TEXTILE embedded into the product to repair areas with holes, cracks or joint movement. Apply a minimum of 2 coats to ensure a complete seal. After the final coat, RTT - Quick Dry can be sprayed over the area to set the product (optional).

NOTE: DO NOT BRUSH OR ROLL OVER THE WET QUICK DRY SPRAY

General Instruction

1. Best applied early morning or mid-afternoon in summer (avoid the intense sun when applying).
2. Because our products are water-based, you must avoid solvents like Petrols, thinners, diesel etc.
3. To avoid bubbling and non-curing, DO NOT apply products when there’s dew, cold wind or rain forecasted within 24 hours.
4. Allow 24h curing time before applying the next coat.
5. Curing time depends on temperature, humidity and airflow. Best 20°C or more. The typical curing time is 3-7 days.

Safety Feature:

• Water-Based
• UV-stable
• Eco-friendly
• Safe for you, your family, pets and plants
• No solvents or VOC (volatile organic compounds)
• Non-flammable
• Usable indoors and outdoors