How To Use

 

• 1. Take apart the fork;
• 2. Slide the old seal off;
• 3. Inspect the stanchion for blemishes;
• 4. Oil the inner surface of the new seal with fresh fork oil;
• 5. Slip the seal over the top of the stanchion and slide it down to the slider;
• 6. Adjust the tool's plastic fitting to match the size of the seal by loosening the three cross head screws and decreasing or increasing the diameter;
• 7. Press the adapters against the seal, slide the driver tool up and down several times until seal is pushed into the slider.