FIBARO Walli Double Switch is a smart wall switch designed to control one or two light sources via Z-Wave network.

It measures active power and energy consumed by the controlled load.

You can install it with provided cover plate and switch button or other compatible.

Can be used with: conventional incandescent and halogen light sources,

LED lamps,fluorescent lamps, electronic transformers (for ELV halogen lamps and LED bulbs),

ferromagnetic transformers (for MLV halogen lamps).

Can be used with FIBARO Walli covers or other compatible:

GIRA – System 55 (Standard 55, E2, Event, Event Clear),

Legrand – Céliane,

Schneider – Odace.

Active power and energy consumption metering.

Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.

Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).

May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers

Power supply110-230V~ 50/60 Hz

Rated load current13A per one channel

16A total

Compatible load types incandescent bulbs

 fluorescent lamps

 electronic transformers

 ferromagnetic transformers

 LED

Active elementmicro-gap relay μ

Recommended external overcurrent protection10A type B circuit breaker (EU)

13A type B circuit breaker (Sweden)

For installation in boxesØ = 60mm, depth ≥ 40mm

Recommended wirescross-section area between 1.5-4.0mm2,

stripped 11.5-13mm of insulation

Operating temperature0–35°C

Ambient humidity10–95% RH without condensation

Radio protocolZ-Wave (500 series chip)

Radio frequency band868.0–868.6MHz; 869.7–870.0MHz

Max. transmitting power+6dBm

Rangeup to 50m outdoors

up to 40m indoors

(depending on terrain and building structure

Dimensions

(Height x Width x Depth)86 x 86 x 51 mm

Compliance with EU directivesRoHS 2011/65/EU

RED 2014/53/EU

Visit www.fibaro.com for more information.