Description:
1. The power supply input voltage is ±15V, ±12V, but need to be informed in advance, the oscillator input signal voltage range and oscillator angle need to be informed in advance, the power supply input terminals are defined in the drawing (Vin+, Vin-, GND).
2 signal input connector definition as shown in the drawing, the input signal is analog signal, +/- 7. 5V signal input, x, Y signal definition
Such as connector identification (X+, X-, GND), if you need its specifications, you need to inform.
3. The heatsink needs to be locked in a large heat sink platform, M3 screws are recommended.
4. Because the power supply voltage and lens size will lead to huge variation in the speed of the oscillator, please consult for specific speed requirements.
Parameters
Analog position input range: ±7.5 V
Operating temperature: 0~ 50°C
Scanning Angle: Factory set ±20° (30° optional)
Scanning speed: >20Kpps (30k ILDA standard test chart)
Lens size: X-14mm*20mm*1mm
X-14mm*20mm*1.1mm
Y- 15mm* 1 5mm*1.1mm
Lens Reflectivity: >99% @45°incidence
Power usage:↓ 10 W
Driver plate size: 95mmx48. 2mmx25mm