The AUTOOL CT200 injector cleaning and testing machine is designed with wide voltage technology and is suitable for 110V and 220V voltage.It is combined with ultrasonic cleaning technology and microprocessor hydraulic control cleaning detection technology. Fuel pump oil supply simulates low, medium and high engine conditions, cleaning and testing the fuel injectors of the automobile; ultrasonic cleaning can simultaneously clean multiple injectors, which can effectively and completely remove carbon deposit for the automobiles injectors.

Ultrasonic Cleaning It works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes more thoroughly.	Reverse Cleaning & ON-Vehicle Cleaning AUTOOL CT200 Fuel Injector Cleaner & Tester is with English Panel. We can clean and test both petrol car and motorcycle injector with this machine. (motorcycle support HONDA YAMAHA SUZUKI SANYANG only)	Wide Range of Applications Supports most of the Cars and Motorcycles among the market.
Applicable Voltage Applicable Voltage:Support 110V or 220V power input Multi-Progress: 6 injectors can be tested and cleaned at one time.	Specifications Power Supply:110/220V Main unit dimensions:405*380*430MM Package weight:17.89KG Package dimensions:485*465*490MM Power of Ultrasonic Cleaning:70W Frequency of Ultrasonic Cleaning:28KHZ±0.5KHZ	Packing List 1pcs X AUTOOL CT200 Petrol Car Injector Tester Main Unit 2pcs X Valve (for discharging fluid from machine tank) 6pcs X Cleaning connector,Sealing ring,Washer fittings,Plugs 1pcs X Ultrasonic cleaning bracket,Ultrasonic cleaning cover,Power cable,Funnel,Oil separator 2pcs X Pulse signal cable 2pcsX Fixing bolt 1pcs x Manual(English)

How to Work ?

1. Clean injector's outside with gasoline or cleaning liquid before open machine
2. Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt.
3. Turn on ultrasonic system，pulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors.
4. Fixed injectors on main machine.
5. Testing injectors for resistance, shorts, and current draw.
6. Performing leak test, spray pattern, and flow rate testing on flow bench.
7. The injectors are now returned to the flow bench for retesting of all functions.

• Ultrasonic cleaning:
• The cleanser added into the ultrasonic cleaner just soaked the injectors’ needle is suitable.
• Before the ultrasonic cleanser is added into ultrasonic cleaner, do not turn on the ultrasonic cleaner. Otherwise, damage may be incurred.
• Strictly prohibit to put the pulse signal cable or its connecter into the cleanser, otherwise damage will be incurred.
• The continue work time of the ultrasonic cleaner don’t be more than 30min, otherwise it will shorten the life.
• Not in using, please put out the power plug.

Uniformity/Sprayability Test: Under this function, the parameters of RPM, PW and time can be adjusted in real time. Leakage Test: Under this function, the parameter of fuel pressure can be adjusted in real time. Injecting Flow Test: Under this function, the parameter of fuel pressure can be adjusted in real time. Auto. mode Test: Under this function, the parameter of fuel pressure can be adjusted in real time.