When a user tries to access the Camera, our Hubble server authenticates the users identity and permits access to the Camera. Setup: Connect the Camera to the Power Adapter, then plug into an electrical outlet. The Camera must be within range of the Wi-Fi router with which you want to connect. Make sure the password of the router is available for entering during the in-app setup process. Note: You can only setup via a compatible smartphone or tablet and not via a PC. Power ON and Connect the Camera: Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket on the back of the Camera Unit. The Cameras Red LED Flashes after the Camera has finished booting. Download Hubble for Motorola Monitors App from Android or Apple App store Run Hubble for Motorola Monitors App: Ensure that your device is connected to your Wi-Fi router. Run Hubble for Motorola Monitors App, enter your account information, read through the Terms of Service, then select By signing up you agree to our Terms & Conditions before you tap SIGNUP. To pair the camera - Press and hold the PAIR button on the back of the Camera Unit for 8 seconds. You will then hear a beep tone, followed by a voice prompt indicating that the Camera is ready for pairing. Tap DETECT CAMERA. The App will automatically search for your Camera, select your Camera from the list of networks as shown in the pictures A6 below. The LED on the camera will cycle from Red to Blue to Purple. Select your Wi-Fi Network, enter your password and then tap Connect. It will take a few minutes for the Camera to connect to the Wi-Fi network before showing the connection status. If connection fails, please tap Retry and repeat the steps.