Automotive Brake Fluid Bleeder is a brake fluid exchanger equipment. The physical principle is to suck the brake fluid from the new fluid storage tank through a pump. And continuously pump it into the automobile brake fluid container at a specified pressure. Then, at each wheel brake cylinder, drain the old brake fluid in the order specified by the original manufacturer of the vehicle until the new brake fluid flows out. Compared with the traditional compressing way to exchange brake fluid, this pulsating brake system bleeding tool can effectively avoid the generation of air bubbles during the filling process, thereby optimizing or avoiding the artificial exhaust process.
Two types of power supply methods | Two pressure modes | Corrosion-resistant filling bottle |
Step 1: Pour new brake fluid into the filling bottle;
Step 2: Connect the suction hose and pressure balance hose to the filling bottle;
Step 3: Connect the filling hose to the brake fluid cylinder via the adapter;
Step 4: Connect the recovery bottle to the brake fluid sub-cylinder;
Step 5: Select standard mode or master mode. One-button start, then wait for the fluid exchange to be completed.
Warmly Reminder:
Q: The machine frequently leaves a lot of air in the brake lines after bleeding. Lines still have to be manually bled?
A: When you use this Brake Fluid Bleeder, run to evacuate the air inside the machine first, then go to connect the car so that the air does not get into the brake system.
2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You don't need a PayPal account)!
3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable !
4. Please make the payment within 3 days.