Fuel Injector Tester & Fuel Injector Cleaner Adapter
The cleaning operation(as picture above) requires aerosol can of fuel injection cleaner(not included), injector connector (not included) and 12v DC battery power supply (not included). Please prepare these necessary tools before your cleaning.
The fuel injector tester is designed with 8 PULSE MODES. The injector tester has more modes to help more fully identify injector stuck, leaking or burnt-out conditions.
Mode 0: Standby state, no output
Mode 1: Single Pulse Low Power Mode - The fuel injector tester cleaner will send out a pulse with a pulse width of about 255 milliseconds.
Mode 2: Short Pulse Low Power Mode - The injector tester cleaner will send out 50 pulses with a pulse width of about 7 milliseconds.
Mode 3: Long Pulse Low Power Mode - The injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds.
Mode 4: Continuous Pulse Low Power Mode - The fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds.
Mode 5: Single Pulse High Power Mode - The fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds.
Mode 6: Short Pulse High Power Mode - The injector tester cleaner will send out 50 pulses with a pulse width of about 7 milliseconds.
Mode 7: Long Pulse High Power Mode - The injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds.
Mode 8: Continuous Pulse High Power Mode - The fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds.