2 in 1 PWM + ARGB Case Fan Hub, Wireless Remote Control Fan Controller

AS PER PICTURE PLEASE VIEW EACH OF THE PICTURES TO GET A BETTER IDEA OF CONDITION SPECIFICS BEFORE BUYING. ALL ITEMS ARE TESTED/CHECKED AND ACCESSORIES, SERIAL NUMBERS RECORDED PRE-DESPATCH. 

IF YOU HAVE ANY QUESTIONS SEND US A MESSAGE

• 【Two interfaces on the left】 The left one is the light, synchronous interface of the ARGB 5V motherboard. If you want to use the synchronous direct connection, please press the MB button on the remote control for 6 seconds to adjust the timing.
• 【Four central temperature control lines】 the red temperature control interface must be connected to the temperature control fan on the left and right, the light interface can be freely connected, the right SATA interface must be connected
• 【Equipped with a remote control】 The two-in-one controller is equipped with a remote control, a motherboard synchronization cable and a temperature control cable. If the motherboard does not support synchronization, you can use the remote control and do not need to synchronize.
• 【The hub】 has a motherboard RGB sync function (for light strips), PWM function and fan power. Support synchronous control of the motherboard and remote control of the light effect. Multi-port 1 to 8 fan for SATA hub power supply 4-pin 12V PWM ARGB address
• 【8 ARGB ports (5V 3-pin)】 8 fan ports (4-pin) PWM function, 1x3-pin lighting 5V ARGB motherboard sync, 1 motherboard temperature control port, for SATA power supply and the remote control button is 21 buttons.