Yaesu FT-817 Replacement electrolytic capacitor kit.
(All the capacitors come from Panasonic,Rubycon,Nichicon,NCC)
This is a set of high reliability aluminium radial electrolytics and SMD aluminium electrolytics to replace all electrolytics in the FT-817, all versions, all revisions.
The electrolytic capacitors
supplied in this kit are the same diameter and lead pitch/pad spacing as the original parts used.
The majority of parts in this kit have a
higher voltage rating. All parts supplied have a higher working temperature of
105 deg C and reliabilty ratings >2000hr
(SMD) >5000hr (Radial). Note that the
10uF 16V SMD parts are the correct size ('A' 4mm), 5mm diameter parts will not
fit.
The list belows shows capacitance value,
working voltage, temperature range, physical size (diameter D, height H and
lead pitch P) followed by the circuit/schematic
location by part identity for each relevant
PCB.
The kit comprises 17 capacitors:
6 off each of the following device:
100uF
16V 105C 5Dx11Hx2P [MAIN:C1341,C1375,C1419,C1441,C1445,C1451]
3 off each of the following device:
470uF
16V 105C 8Dx11Hx3P5 [MAIN:C1370,C1373 PANEL:C4038]
1 off each of the following device:
470uF
10V 105C 6.3Dx11Hx2P5 [PANEL:C4033]
1 off each of the following device:
22uF
16V 105C 4Dx7Hx2P [MAIN:C1369]
1 off each of the following device:
1uF
50V 105C 4Dx7Hx2P [MAIN:C1175]
3 off each of the following device:
10uF
16V 105C SMD 'A' [PA:C3020,C3028 PANEL:C4025]
1 off each of the following device:
100uF
25V 105C SMD 'D' [PANEL:C4031]
1 off each of the following device:
47uF
35V 105C SMD 'D' [PA:C5411]
|
|