ProXL - 1K Epoxy Primer Aerosol - 500ml
Pro 1K Epoxy primer is an all-purpose 1K primer available from Buzzweld Ltd that provides excellent adhesion and corrosion prevention on sheet steel and many other difficulty substrates. It is fast drying with good flow and can be applied wet-on-wet. It is also suitable as a welding primer and has good insulation against moisture.
- Excellent adhesion direct on to bare metal.
- Active rust preventing pigments that provide excellent corrosion resistance.
- Suitable as a welding primer
- Fast drying.
- Super Smooth Finish
- Buzzweld Ltd support
- Product is supplied with 2 nozzles, offering different spray patterns
- Can be used wet on wet.
- VOC content- 654.8 g/l
- Coverage- 1m²
- Through Cure- 20 mins at 20ºc
Epoxy Substrates
Suitable substrates (cleaned & abraded)
- Bare steel
- Galvanised steel
- Aluminium
- Zinc coated steel
- Fibreglass
- Old paint work
Epoxy Characteristics
Basis Of Binder | Epoxy Resin |
Colour | Grey |
Coverage | 1m2 |
Temperature Resistance | up to 90C |
Storage | up to 10 years |
Size | 500ml |
VOC | 654.8 g/l |
Application Guide for Epoxy Primer
- Remove all rust from metal surfaces
- Clean surface with Procleaner, then sand
- Carry out test spray
- Areas to be sprayed must be free of grease, dust and dry
- For professional use only
- Wear an appropriate respirator
Alternative product- Buzzweld 1K Epoxy Speed Prime