Feature: 1. SMALL SIZE Lightweight and portable, it does not take up extra space, can be easily used in various situations, and has high practicability.2. HIGH ACCURACY Supports fast and accurate testing, it can meet high standard industrial measurements and has high safety. 3. PROFESSIONAL DESIGN It is used to detect the state of the open phase and the sequence of the phases, and can be applied to three phase alternating current measurement. 4. SOUND AND LIGHT INDICATION FUNCTION It indicates the order of the phases is indicated by light emitting diodes (LED) and buzzers. 5. SIMPLE OPERATION METHOD Equipped with a special test clip, you only need to insert the test clip on the metal probe of the test and tighten it, you can easily clamp it anywhere for measurement. Specification: Item Type: 3 Phase Rotation Meter Package List: 1 x Rotation Tester 3 x Clip 1 x Manual 1 x Portable Bag Note: 1. The meter is a high voltage test equipment. Before using it, observe whether the meter is in good condition. If the following conditions occur, you must stop using it, and perform corresponding inspections and repairs to avoid electric shock and unsafe accidents. A: The appearance of the meter is obviously damaged (such as cracks or damage in the shell, broken skin on the test , etc.); B: The instrument was severely squeezed during transportation; C: The meter has been idle for a long time under improper conditions (such as in the bathroom or a relatively humid place, etc.). 2. Never open the case of the meter during the measurement process to avoid electric shock and unsafe accidents. 3. During the measurement, there is a large voltage input from the test . Do not touch the bare wire or the metal part of the test directly with your hands to avoid electric shock. 4. Although sometimes all the phase indicators are not lit, but there is still a voltage loop, pay attention to prevent electric shock. 5. The circuit voltage should not be higher than 600V during measurement to avoid unsafe accidents. 6. When measuring 60V ACV, the continuous use time should be no more than 60 minutes; when measuring 600V ACV, the continuous use time should be no more than 4 minutes. 7. It is not allowed to use this meter for measurement in rainy outdoor and humid environment, so as to avoid unsafe accidents. 8. Please note that the new type and old type of this product will be sent randomly,and make sure you will not mind before ordering. |
