1.8MHz-50MHz ATU-100 HF shortwave Antenna Radio Station Automatic Antenna Tuner

Product features:
1. Compact appearance, outdoor portable, with housing, rugged and durable
2. With buttons, with 0.91 inch OLED display, resolution of 128x32 pixels, display at a glance
3. This product is both a Antenna Tuner and a power standing wave meter, supporting the display of standing wave value, forward power
4. This circuit contains a set of 7 inductors and 7 capacitors, which makes it can work in a wider frequency range, can effectively cover from 1.8MHz-50MHz amateur radio range
5. Maximum current consumption of 400mA, maximum operating power of 100W, maximum possible measurement power of 150W
 
Product parameters:
ATU-100 automatic Antenna Tuner DIY open source N7DDC
The finished kit is hand soldered and provides 3.2 program support SSD1306 controller with 128x32 pixels resolution and 0.91 inch diagonal monochrome OLED display.
the circuit contains a set of 7 inductors and 7 capacitors which allows it to operate over a wider range of whisker rates and can effectively cover the amateur radio range from 1.8MHZ- 50MHZ.
Technical characteristics (base model):
Allowable supply voltage range: DC10-15V
Maximum current consumption: 400 mA
Maximum operating power: 100W
Maximum possible power: 150 W
Minimum power required to start tuning: 5 W
Minimum possible measurement power: 0.1 W
Measurement resolution at power up to 10 W: 0.1 W
Measurement resolution for power greater than 10 watts: 1W
Power measurement accuracy error: +10%
Maximum installation inductance: 8.53H inductance
Minimum installation step: 0.05H
Maximum installed capacitance: 1869 pF
Minimum capacitance installed step: 10 pF
Typical consumption: 100-200 mA
Note! This Antenna Tuner core design information comes from its original author N7DDC's Auto Antenna Tuner open source project.
Currently optional features are 1w start tuning, 1 second screen self-extinguishing/normal light, fully automatic/manual mode, etc. The default is 1w start tuning, screen constant light, manual/automatic switching mode.
 
Operating instructions:
DC socket connected to the power supply DC 10-15V positive and negative, the panel POWER switch is in the open position, set the radio power at 5W-10W can, long press the RESET/TUNE button, the Antenna Tuner screen appears TUNE words, at this time the transmitter transmitting sustained power Antenna Tuner can be adjusted automatically. Short press the RESET / TUNE button day adjustment to release the previously adjusted LC relay, in the straight-through position.
The black and red terminal block is used experimentally for the adjustment of long-line antenna.
Ver1.21 version in the spare position on the motherboard to add SX1308 boost circuit ( this part of the components need to be purchased by the player ), can be reserved through the SMT Hummer plate to achieve the power supply mode switch. And add Auto Full Auto mode interface on the motherboard to facilitate the DIY mill. Note: Because of the noise interference that may arise after adding this DC-DC boost circuit, not as a basis for product quality issues. SX1308 is a fixed frequency, S0T23-6 closed current-mode boost converter, up to 1.2MHZ operating frequency makes the peripheral inductor-capacitor can choose smaller specifications, built-in soft-start function reduces the start-up inrush current. Internal integrated 80 milliohm power MOSFET, the highest boost efficiency up to 97%.
 
Packing list:
Power meter *1
Wire*1

Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.

International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.

Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.

Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.

 

  For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the " Ask the seller a question" link on eBay.
  We expect positive feedback and 5 scores DSR  from you. 

  1. We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
  2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
  3.  Please include your eBay ID and item number with any email requests.

 

DataCaciques