• Power Supply

  Rated Voltage:	4.50v-5.25v
  Maximum Current Consumption( active)	< 500 mA(2.5 W)
  Power Consumption during USB Suspend	< 500 uA (2.5 mW)

   

• Output ratings

• The following output ratings are valid for Left and Right hearing instrument connectors.

• Fixed Battery supply (pin 1), common for Left and Right side	1.35V, 10/50mA(current rating is controlled by fitting software)
  Programmable battery supply (pin 5), common for Left and Right side	-3.50V to +3.50V 30 mA(voltage is controlled by fitting software)

• Operating environment

• Operation at temeratures below -20°C or above +60°C may cause permanent damage.

• Temperature	5°C-40°C
  Humidity	30 to 90%
  Warm-up time	<20 seconds
  Air pressure	600 hPa to 1060 hPa

• Dimension and Weight

• Size (L*W*H)	137*114*37mm
  Net Weight	230g

• Patient Safety

•  The HI-PRO USB unit complies with the following standards:

   EN 60601-1, Type BF

  UL60601 and CAN/CSA-C22.2 NO 601.1-90

  To comply with the above standards, the programming cable and the connector to the hearing instrument must meet the following requirements:

   No conductive parts may be accessible when the programming cable is connected too HI-PRO USB unit.

   The programming cable and the connector must provide double isolation and be able to withstand a dielectric strength test potential of 500V.

• Standards

• Safety:	EN 60601-1, Type BF
  Electromagnetic compatibility:	EN 60601-1-2
  Systems	EN 60601-1-1
  Hearing Instrument Interface	EN 60118-14

•  Notes on EMC ( Electromagnetic Compatibility)

  The HI-PRO USB is part of a medical electrical system and is thus subject to special safety precautions. For this reason, the installation and operating instructions provided in this document should be followed closely.

   Portable and mobile high-frequency communication devices, such as mobile phones, may interfere with the functioning of the HI-PRO USB.

 Shipping Note: