ANCEL FD700 for FORD Car All System OBD2 Scanner Diagnostic Tool BMS DPF TPMS
 

ANCEL FD700

For ford obd2 scanner is a specific version design for Ford Group and an upgraded version of the FD500, supports the vehicles of Ford, Lincoln, and Mercury after 1996 with 16PIN interface, including F150, Transit, VAN. Furthermore, the ANCEL scanner tool FD700 not only contains the special functions of the FD500, but also more other special functions, include ABS Service Bleed, Reset TCM KAM, SAS calibration, DPF Reset, TPMS reset, IQA, Oil light service reset, Clear crash data memory, Fuel Injector Correction Factors, DPF Parameter Reset, Transmission Tables Reset, Clear EGR Adaptive Tables, Fuel Injection Pump Learn, Diesel Particulate Filter Static Regeneration, and more.

Please note:

1. Each car model has different system configurations, the specific reset functions may vary;If you are not sure whether the product supports your model, please send your model, year, for example : xx, 2001, 2.0cc, Diesel, we will reply u when we are online, Thank u.

2. The updated software only supports Windows 7/8/10, can not be updated on MAC SYSTEMS. Only Windows 7 needs to install the driver before updating the device;
3. It can do all system diagnosis and special functions for FORD group vehicles. But FD700 only can diagnose engine systems for 16 pin Non-FORD vehicles sold in the US after 1996;
4. Due to the complexity of the agreement of cars produced by car manufacturers, please let we know your Vehicle information if you can't confirm that whether the scanner can work on your vehicles.

Why You Chose FD700 ?

1. The FD700 OBD2 scanner is specially designed for diagnosing most 12V 16-Pin FORD/LINCOLN/MERCURY Ford Series vehicles(after 1996), but it also has the ability to work on 12V cars and light trucks (non-electric) manufactured in 1996 or later that are OBD II-compliant with 16-Pin OBD II protocols (J1850 VPM, J1850PWM, ISO9141, KWP 2000 and CAN).

2. OBD 6 modes for OBD II vehicles, FD700 is capable of reading/erasing, showing error code definitions, turning off the MIL (check engine light), reading data stream, testing EVAP system, reading I/M and retrieving VIN information.

3. Basic functions for FORD Group vehicles: it can do the all system diagnosis(ABS, Transmission, SAS, SRS, ESP, TPMS and other systems). Please note that FD700 only can diagnose engine system for 16 pin Non-FORD vehicles sold in the US after 1996. But it can do more systems and special functions for FORD vehicles.

4. Special functions for FORD Group vehicles: ABS Service Bleed, Battery registration, EPB Maintenance, SAS Calibration, Reset the EGR Valve Learned Values , Reset TCM KAM, PCM engine special functions, Fuel Injection Pump Learning, Transmission Learning, TPMS reset, etc.

5. Automatic vehicle model identification makes it easy to use. Two color UI themes for you to choose. Life-time free software updates available to fix the latest bugs or add new parameters. Just download the software from the official website, then follow on-screen instructions to install.

Multi-Special Functions for Ford/Lincoln/Mercury with OBD2 Functions For All Cars Make After 1996

1. 6 OBDII functions: Read Fault Codes, Erase Fault Codes, Read Datastream, Retrieves VIN Information, I/M Readiness, EVAP Testing;

2. Injector Coding(IQA): Carry out this procedure to enter the new IQA Codes whenever a fuel injects is replaced or to make a correction to the existing codes currently stored in the PCM. The adjustment codes increase injector efficiency on the engine and improve emissions;

3. Reset PCM KAM: Resetting KAM will clear learned values the PCM has stored for adaptive systems such as idle and fuel. After a Diagnostic Trouble Code (DTC) causes an engine or vehicle warning light, need reset KAM;

4. Throttle Position Sensor (TPS) reset: The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronic fuel-injected car, a throttle position sensor and airflow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair;

5. Diesel Particulate Filter (DPF) Regeneration: Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;

6. Reset the Oil Change Indicator: Perform this procedure after the engine oil has been drained and refilled;

7. BMS Reset: This procedure resets the battery monitoring system. Once you replace the battery in the vehicle, you need to perform this step;

8. DPF Reset, Reset Transmission Tables, Reset the Powertrain Control Module Learned Values, Reset the Oil Change Indicator, Reset the Heated Exhaust Gas Oxygen Sensor Learned Values, Reset the Fuel Injector Learned Values, Reset the Fuel Injection Pump Learned Values, Reset the Exhaust Gas Recirculation Valve Learned Values, Reset the Diesel Particulate Filter Learned Values, Reset the Intake Air Throttle Valve Learned Values;

9. Steering Angle Sensor Calibration, Clear Transmission Adaptive Tables, Transmission Learning, Steering Wheel Position Sensor Calibration, Steering angle sensor calibration, IQA, Injector Correction Factors, Fuel Injector Correction Factors, Fuel Injection Pump Learn, EPB Maintenance Mode, DPF Regeneration Suspension, DPF Manual Regeneration, Reset KAM, BMS Reset, Diesel Particulate Filter Static Regeneration.

All-System Diagnostic Scanner for Ford Lincoln Mercury

1. Engine System: The engine determines the power, economy, stability of the car. The FD700 OBD2 scanner can support 6 modes of OBDII functions & check battery voltage. Easily identify vehicle problems and turn off the engine lights. Help you pass the smog test and keep your car in the best condition.

2. TPMS: When there is a problem with your car's tire pressure, or you have inflated the tire to the correct PSI, or the TPMS warning light turns on for no reason. At this time, you must reset the TPMS so the light turns off.

3. SRS: The FD700 can read and erase the SRS(Airbag) system error code, turns off the airbag warning light. To prevent the dreadful danger caused by the airbag not working properly after a collision.

4. SAS: SAS Calibration permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor. The FD700 helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

5. Battery System Diagnosis: Evaluate the battery charge state, monitor the closed-circuit current, battery management system reset, detect real-time data from 12V batteries, and display BATTERY DATA with fluctuations ranging from 8V to 18V.

6. EPB: FD700 scanner can read and clear EPB trouble codes and is capable of retrieving fault codes information from the ECU.

7. ABS: It helps maneuverability while hard braking. ABS essentially prevents the wheels to lock up and skid when brakes are slammed.

8. Transmission: Auto Transmission is a set of transmissions used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine. FD700 OBD2 scanner can read/clear codes and read data stream from AT.

9. Oil System: Oil reset, check the oil at regular intervals, and have the car serviced regularly. After draining the oil out of the engine, the FD700 scan tool can help you to reset the Oil service lamps.

What ANCEL FD700 Better Than FD500 ?

Both FD500 and FD700 are specially designed for Ford vehicles, but FD700 is a professionally upgraded version of FD500. In addition to hardware upgrades, the FD700 can do more high-level reset functions than the FD500.

Compared with the OBD2 mode of FD500, FD700 adds an EVAP system test.

Q: I have a Ford car. Will the FD700 support DPF Reset/TPMS Reset/BMS Reset/SRS diagnosis and other special functions?

A: Each car model has different system configurations, the specific reset functions may vary. Not every Ford vehicle supports all functions. We suggest that you make pre-sales inquiries, please tell us the specific car model, production year, and which functions you want to do, we will answer your questions.

Q: What if I receive the product and cannot use it in my vehicle?

A: Hi, as long as the product is not damaged, we support unconditional returns. If you are not sure whether the FD700 is compatible with your vehicle before purchasing it, please via "Buyer-Seller Messages" tell us your car model and the year of manufacture. Even if it’s not compatible, we can recommend a suitable device for you. We will reply to your email within 24 hours.

Q: I have a Ford vehicle and a Non-Ford vehicle, can I purchase this for both of them?

A: Yes, you can. FD700 can diagnose engine system for 16 pins Non-Ford vehicle sold in the US after 1996. Meanwhile, it can do more systems and special functions on your Ford vehicle.

Free Update Lifetime :

If You do not how to use product and update ,do worry ,please contact us in time ,we will reply you within 24 ours

Packge List :

 

We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect. 

Please contact us if you need to use another method to pay.

Payment should be made within 7 days after bidding ends.

Otherwise a Unpaid Item case will be opened to you.

We are not responsible for buyers’ local taxes.

Please include your special requests in eBay note if there is any.

Order will be shipped within 1 business day after payment confirmed.
We have warehouse in USA, From our US warehouse via UPS or USPS shipping.
Delivery time varies from 2 to 5 business days.
We will ship according to your eBay address.
Please make sure it is correct and include phone number for delivery.
If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
Please include your special requests in eBay note if there is any.
Return Policy
Please return the item within 60 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions.
 

We are authorize distributor, our all items are 100% original and Our devices have warranty,
5 Year free repair for the devices.

 
Please contact us firstly when you need warranty service.

In case an item arrives faulty, please contact us as soon as possible and keep it unused.

We will instruct you on how to return and get refund or replacement.

If the item has been used, we have the right to decline your claim.

Items should be returned on buyers' cost for repair or replacement.

Who We Are?

We are specialized dealer of On-Board Car Diagnostic tools and automotive electronics

for more than 15 years.

We are authorized first class distributor of Launch, Foxwell, Autek, Ancel, Innova, Autophix, Thinkcar, Kzyee brands,

and more brands will be show in our store in near future.

What Do We Have?

We have office and warehouse in US  to ensure fast shipment and after-sale service.

We have more than 1000 employees devoting to customer satisfaction.

1:If youhave any problem about the goods, please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfactory absolutely.

2: our business time:M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)

3:Please leave us Positive FeedbackPositive feedback rating and 5-stars★★★★★after you received our package you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.

 

 
PushAuction

DataCaciques