ORICO NVMe M.2 dual hard drive dock can turn an M Key NVMe PCIe SSD into an external drive. When connected to a computer, it can recognize two SSD cards at the same time, supporting a single disk up to 2TB.
Main Features:
|
|
|
---|---|---|
Wide CompatibilityORICO external drive docking station specially designed for M Key M.2 NVME PCIe SSD of 2242/ 2260/ 2280/22110, up to 4TB. Do not support NGFF SATA based B-Key and M&B-Key M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD or any SSD from Mac. |
LED IndicatorORICO external drive docking station with blue indicator can show you the copy progress(25% -50% -75% -100%), and when the copy complete the indicator light turns on. You can learn the working status of this dual- drive bay easily. |
Tool-Free InstallationORICO NVMe M.2 hard drive enclosure allows users to insert NVMe M.2 devices directly, No mounting screws or attachments are necessary. Very convenient for those who have multiple NVMe M.2 SSDs that need to be frequently re-connected or used in the short run. |
|
|
|
---|---|---|
STEP 1Insert the original disk and the target disk into the hard disk slots, the target disk capacity should LARGER than the original disk capacity. NOTE: Copying does not intelligently identify the data on the hard disk. Copying is a full-to-one cloning method, so please back up the data on the target disk before copying to avoid loss of important data. |
STEP 2Connect the power adapter to the tool-free dual hard drive dock. NOTE: Before connecting the power adapter, you need to make sure the USB cable is unplugged and not connected to the USB interface of the PC. |
STEP 3Press and hold the clone button, then press the power switch to turn on the power (at this time, keep pressing the START button and not let go), waiting for 10-15 seconds, the blue lights are all on. Still keep holding the clone button for 5 seconds and let go, the clone will begin. The indicator light will show the copy progress (25% -50% -75% -100%). When the clone is completed, the 4 LED lights will always be on. NOTE: If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors. |
Warm Tips:
Hardware Interface | USB Type C |
Brand | ORICO |
Hardware Platform | Windows |
Material | Aluminum |
Memory Storage Capacity | 4 TB |
1.Aluminum alloy design, which has a high-grade appearance and texture.
2.Tool-Free Installation, saving the trouble of screwing, easy to use, and portable.
3. With safety lock button design, which can be locked and extracted to prevent misoperation.
4. Support multi M.2 NVMe SSD, compatible with 30mm/42mm/60mm/80mm specifications.
5. Adopting USB3.2 Gen2 Type-C interface 10Gbps ultra-high-speed transmission technology, support for forward and reverse insertion, backward compatible with USB3.0/USB2.0.
6. Support SSD TRIM instruction and UASP acceleration.
7. Plug and play, no driver required. Support hot-swap.
8. We provide Aluminum Cooling Vest(Heatsink) and Silicone Thermal Pad to help against overheat.
Easy to use - Unlike some enclosures that force you to deal with small screws to take them apart and put them together, this uses a "tool free" approach where the two parts of the enclosure pop apart (though they're quite secure when together) and you're easily able to install/change the drive.
1. Please properly back up all data on the SSD to prevent data loss.
2. In any case, during data transfer, please do not unplug the M.2 SSD case from the PC, otherwise data may be lost. Please unplug the cable before taking out the SSD after use.
3. Once connected, your PC/Laptop's OS will initialize the M.2 SSD. This process may take a minute. You can access the data if the SSD is partitioned and the data is on the SSD.
4. Be careful to check compatibility before installing an SSD.
5. Please be as gentle as possible when installing the SSD to avoid scratching the components on the printed circuit board. When installing an SSD, be careful of static electricity. On the other hand, for safety reasons, it is also recommended to not connet device before proceeding with the installation.
|
|
|
---|---|---|
Auto Sleep FunctionFeatures 10-min Auto Sleep Mode to let your HDD or SSD stop spinning to have a rest. Good to extend the lifespan of the hard drives. |
Max up to 8TBOnly M.2 NVME PCIe M-Key SSD is supported, and all MAC SSD is not supported.Does not support NGFF B-Key and B + M-Key SSD. |
Universal CompatibilityCompatible with Windows 10/8.1/8/7/XP/Vista, Mac OS, Linux or Chrome OS; Game consoles like PS4, PS4 Pro, PS3, Xbox one, Xbox 360; Raspberry Pi; TV; Router, etc. |
Warm note - if your computer does not recognize the SSD box. Please follow the steps
For a new SSD, you must first go to Disk Management and initialize the SSD. Then it can be recognized and used normally. Please complete the hard drive initialization by following the steps below.
How do I start Disk Management?
Right click on Computer - Manage - Disk Management. Find your unallocated hard drive, right click on Unallocated and choose New Simple Volume Wizard.
How do I start Disk Management (in Windows 10)?
Click Start -> Run -> type compmgmt.msc -> click OK. You can also right-click the My Computer icon and select Manage. In the console tree, click Disk Management.
Does the case get hot?
The case is treated with heat during operation, but this is due to the nature of the drive. The NVME drive is working at extreme speeds and is getting hot. The aluminum housing acts as a heat sink and has an overheating protection function.
If your SSD overheats while transferring large amounts of data, the case will automatically protect against overheating and enter read-only mode or stop the transfer or reduce the data transfer speed. Avoid damaging your SSD from overheating and improve the lifespan of your SSD.
NOTE: Different computers have different overheat protection problems. Don't worry if you come across this. Once your SSD has cooled down, you can use it again. Your file will not be lost.
The computer always reminds you, "You need to reset the hard drive so that the logical hard drive manager can access it"?
Your SSD lost the partition, you need to rebuild the partition table.
You need to download the DiskGenius software and repair your hard drive.