Genuine Prusa Edition E3D V6 All-Metal Hot End (HotEnd) 24V Direct Drive

The Prusa specific HotEnd is a drop-in replacement for Prusa MK2/2S and MK3/3S printers, featuring the exact components that we supply directly to Prusa. High-temperature performance The benefit of an all-metal design means the V6 can comfortably reach 300°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C), then you will need to use a plated copper heater block along with a PT100 or PT1000. Print standard materials such as PLA, PETG and ABS and high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK. Easy to use The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless. Precise Our all-metal HeatBreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal HeatBreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions. Prusa drop-in replacement Featuring a Prusa specific heatbreak with a custom internal geometry, providing more reliability with retractions when using the MMU. Ships with a Prusa specific thermistor with a pre-prepared extension cable for a drop-in replacement experience. Please note: This HotEnd does not come with the specific PTFE used by Prusa, please retain the PTFE from your existing HotEnd. For reference, PTFE should look like this on the MK3S/MK2.5S and this on a MK3/MK2.5 MMU2. Key features: - Prusa HeatBreak - Maximum temperature: 300°C - Prusa thermistor - 40w heater cartridge Kit includes: - 1 x V6 HeatSink 1.75 mm - 1 x Stainless steel Prusa HeatBreak - 1 x Brass nozzle 1.75mm 0.4mm - 1 x 40W 24V OR 12V heater cartridge - 1 x V6 aluminium HeaterBlock - 1 x Prusa specific thermistor cartridge - 1 x Collet - 1 x Collet clip - 1 x V6 fixings kit - 1 x M3 grub screw - 1 x M3 washer - 1 x Thermal paste

Genuine Prusa Edition E3D V6 All-Metal Hot End (HotEnd) 24V Direct Drive

The Prusa specific HotEnd is a drop-in replacement for Prusa MK2/2S and MK3/3S printers, featuring the exact components that we supply directly to Prusa.

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 300°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C), then you will need to use a plated copper heater block along with a PT100 or PT1000. Print standard materials such as PLA, PETG and ABS and high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.

Precise

Our all-metal HeatBreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal HeatBreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Prusa drop-in replacement 

Featuring a Prusa specific heatbreak with a custom internal geometry, providing more reliability with retractions when using the MMU.

Ships with a Prusa specific thermistor with a pre-prepared extension cable for a drop-in replacement experience.

Please note:

This HotEnd does not come with the specific PTFE uséd by Prusa, please retain the PTFE from your existing HotEnd. For reference, PTFE should look like this on the MK3S/MK2.5S and this on a MK3/MK2.5 MMU2.

 

Key features:

- Prusa HeatBreak 

- Maximum temperature: 300°C

- Prusa thermistor 

- 40w heater cartridge

 

Kit includes:

- 1 x V6 HeatSink 1.75 mm

- 1 x Stainless steel Prusa HeatBreak

- 1 x Brass nozzle 1.75mm 0.4mm 

- 1 x 40W 24V OR 12V heater cartridge

- 1 x V6 aluminium HeaterBlock 

- 1 x Prusa specific thermistor cartridge 

- 1 x Collet

- 1 x Collet clip

- 1 x V6 fixings kit 

- 1 x M3 grub screw 

- 1 x M3 washer

- 1 x Thermal paste

×

Shipping info

Click the Shipping & Payments tab above the listing description for more info

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT


Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Additional Information

No additional information at this time

Ask seller a question

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© West3D Printing

Click the Shipping & Payments tab above the listing description for more info

Accepted Payment Methods

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Returns are accepted

Items must be returned within 30 days of the auction ending

Seller will pay for return shipping.