1000KV DC High Voltage Generator Booster Board Inverter Transformer Type-C US

Product Feature:
1. DC high-voltage generator up to 1000KV
2. Perfect for DIY enthusiasts
3. Can be used for high pressure in middle school science popularization experiments, electronic instruments, negative ion generators, and scientific small-scale production
4. TYPE-C interface, can be connected to a charger for charging
5. The product is made of high-quality materials with guaranteed quality
 
Product Introduction:
This module is a finished module for scientific small-scale high-voltage inverters, transformers/boosters. After DC3.7V-6V voltage is input at the input end, tens of thousands of volts of DC high voltage can be obtained at the output end, which can be used as high voltage for science popularization experiments in middle schools, electronic instruments, negative ion generators, and small science production. The module is made using the principle of Tesla coil, and outputs high-voltage pulse current. It is small in size, high in efficiency, and simple in peripheral circuit (just connect the switch, and the battery can). The discharge intensity is strong.
 
Product parameters:
Input voltage: DC3.6-6V, red positive pole, green negative pole, do not connect, as connecting may burn out the module
Input current: 2A-5A (related to voltage)
High voltage type: pulse high and low voltage integrated type
Output voltage: approximately 500KV-1000KV (please pay attention to safety when using)
High voltage bipolar discharge distance: 10-20mm
Output high-voltage line length: approximately 100mm
Input power line length: approximately 100mm (red line represents positive pole)
 
Product Usage:
The module is divided into input and output terminals. The red and green lines are the input terminals, with the red line being positive and the green line being negative. The other end has a double red thick high-voltage output terminal, which is fixed at a suitable distance from the high-voltage line terminal. The input terminal can be connected to a battery to generate a high-voltage arc;
About the input power supply: a single 3.7V lithium battery can be used, such as 18650 battery, idle mobile phone battery (to remove the protective plate, the recommended capacity is more than 2000mAh), or nickel cadmium/Nickel–metal hydride battery pack, Lead–acid battery, etc.
 
Module usage precautions:
1. The high-voltage module should avoid being powered on when the high-voltage is unloaded. Before powering on, the appropriate distance between the high-voltage wire ends must be adjusted. The arcing distance of the high-voltage wire is proportional to the battery voltage and capacity used.
2. When testing the arc distance, the experiment should be conducted from short to long. It is strictly prohibited to exceed the maximum arc pulling distance when powered on. Due to the inability to release high-voltage energy, it is very easy to damage the module.
3. The module has high power and is not suitable for internal heat dissipation, so it cannot be operated for a long time. It works for 3-5 seconds at a time.
4. The way to determine whether the battery capacity can drive the maximum output power is to measure the battery voltage during arc pulling. If it is around 6V, the maximum power output can be achieved.
5. A small capacity lithium battery connected in series has a voltage of 3.7V, and the measured voltage has dropped to around 2V in the arcing state. The smaller the capacity, the lower the voltage. So it is recommended to use a lithium battery with a capacity of over 2000MA, and it is best to have a battery with a capacity of over 4000MA if possible.
 
Product List:
1. 1000KV high-voltage package * 1
2. Acrylic shell * 1 set
3. 18650 battery * 1
4. Charging/discharging control board * 1
5. M3 * 16 screws * 3
6. M3 nut * 8
7. M3 * 6 screws * 3
8. M2 * 16 screws * 3
9. M2 nut * 3
10. M3 * 1

Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.

International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.

Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.

Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.

 

  For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the " Ask the seller a question" link on eBay.
  We expect positive feedback and 5 scores DSR  from you. 

  1. We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
  2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
  3.  Please include your eBay ID and item number with any email requests.

 

DataCaciques