USB HUB splitter 1 to 7-port USB hub seven-port USB splitter module with power supply USB2.0 expansion
USB2.0 hub, USB one-to-seven port expansion splitter, USB HUB.
Newly listed V5 version, MOS automatic power switching, enlarged USB port spacing, multi-device plug-in conflicts, self-recovery fuse, crystal transparent acrylic shell, high-quality workmanship at a glance, intelligent identification of device insertion, only the normal working USB port will light up LED. One USB interface can be expanded to 7 USB interfaces, the measured maximum speed can be above 50MB/S, super large filter capacitor, stable and reliable work.
Power options:
1. Mainly connect keyboard, mouse, U disk and other small current devices, without using power adapter.
2. To connect high-current devices such as mobile hard disks, please choose a power adapter (3A).
If you have your own USB cable (type B cable, printing cable), you don’t need to buy a USB cable. If you don’t have one, you must buy it. If you have a 5V USB power supply, you can buy a USB-to-DC cable (the current can be as large as it is 5V. Of course, the adapter with a small current cannot carry a high-current device such as a mobile hard disk. It is recommended that at least a 2A power supply is sufficient).
Feature
● Brand new original FE MTT main control, USB2.0 480Mbps speed, the measured speed is greater than 60MB/S.
● Without any drivers, it directly supports Windows, Linux, Android, etc., plug and play.
● Both the upstream USB port and the extended downstream USB port connected to the computer have large capacitor filtering to ensure pure power supply and stable and reliable communication.
● Automatic power switch, low-power device keyboard mouse U disk does not need external power supply, it can be used when plugged into the computer. When you want to use mobile hard disk, USB 4G card, fan light high-power equipment, plug in DC5V power, and automatically switch from the computer's USB port to DC power supply.
● Intelligent recognition, the LED of the corresponding interface will light up only when the USB device is working normally.
● Automatic hibernation. The USB port connected to the computer has a device indicator. At least one device is plugged in before the LED will light up. If there is no device, it will light up for about 2 seconds and automatically turn off to enter the energy-saving mode.
●Increase the USB spacing, even if a wide USB device is inserted, there will be no conflict, and 4 devices with a width of 24mm can be inserted at the same time.
●Connect the computer with a 500mA fuse to protect the computer's USB interface, and the downstream USB interface has a 1.5A fuse, which can drive high-current equipment.
●Crimped USB interface, easy to insert and use.
Package Included:
1 x USB HUB Splitter