<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">

ICE Ignition Pro 100 Leads - BB Chev, MALE Distributor & Coil, Tailored To Suit Your Engine 

Do you have an odd combination of MALE and FEMALE posts on your Big Block Chev's Distributor and Coil?  Have you relocated your coil and require a coil lead length that is different from the factory standard? Then check out this listing for the ICE Ignition 9CHE813 Pro 100 Ignition Custom Ignition Leads / Plug Wires on eBay to suit all Big Block Chevrolet V8 engines. 

This listing permits changes to the colour of the ignition lead used, changes to the Distributor, Coil and Spark Plug Boots and Terminals (B&T) as well as the length of the coil lead. The spark plug lengths are the same as per the factory ignition leads. The length of the spark plug leads can not be changed for this listing. If you need to do this please consider the ICE Ignition DIY Ignition Leads.  The spark plug lead fitment for these ignition leads is UNDER THE EXHAUST. The DEFAULT ignition lead configuration for this listing is listed below.

• MALE Post Distributor            MALE Post Coil

​

•        45 Deg. Spark Plug Boots     fitment around the valve covers

Please Note: We do not hold stock of this product, each eBay order will be manufactured according to your chosen options. Please allow up to 3 Business Days for your ignition leads to be manufactured. Once ready, they will be shipped using Star Track's Premium Service. Typically shipping times are 1 to 2 business days.

As this is a custom product to suit your needs we do not accept returns if you have changed your mind. If you provided incorrect measurements or feedback there will be an additional cost to rectify this. Having said this, we will rectify any issues at our cost if your selected options are not provided. We are here to help, If you are unsure please contact us first via eBay Message  and we will assist you. 

Available Options

Please Note: Only the length of the Coil Lead length can be changed in this listing. If you need to customize the length of the spark plug leads then we suggest checking out our ICE Ignition DIY Ignition Leads on eBay. The following changes can be made to the ignition leads.

1. Lead Colour Choice - The following lead colour options are available 
   • BLACK (DEFAULT), RED, or BLUE
2. Distributor Boots & Terminals (B&T) - The following Distributor Boot Types and suitability are available 
   • 90 Deg. to suit a MALE Post Distributor (DEFAULT)  -or-  90 Deg. to suit a FEMALE Post Distributor
3. Spark Plug B&T - The following Spark Plug Boot Types are available 
   • 45 Deg. Spark Plug Boots (DEFAULT) -or- 90 Deg. Spark Plug Boots -or-  STRAIGHT Spark Plug Boots
4. Coil Lead Length and B&T's - The following Coil Boot Types are available 
   • Distributor End - 90 Deg. to suit a MALE Post Distributor (DEFAULT) -or- 90 Deg. to suit a FEMALE Distributor Coil; 
   • Coil End - 90 Deg. to suit a MALE Post Coil (DEFAULT) -or- 90 Deg. to suit a FEMALE Post Coil -or-; 
   • Coil End - STRAIGHT to suit a MALE Post Coil -or- STRAIGHT to suit a FEMALE Post Coil 
   • Coil Lead Length - If you require a longer coil lead please measure from the Post of the Distributor to the Post of the Coil and provide this measurement. This is known as the "Post to Post" measurement. 

How To Place Your Order - Use eBay's "Customer Comments" Section When Placing Your Order

Copy and Paste the template below and select your preferred options by deleting the options you don't need. Please paste your answers in the "Customer Comments" section when placing your order. If an option below is NOT provided we will assume you have chosen the DEFAULT option

1. Lead Colour Choice
   • BLACK (DEFAULT), RED, or BLUE
2. Distributor Boots & Terminals (B&T)
   • 90 Deg. to suit a MALE Post Distributor (DEFAULT)  -or-  90 Deg. to suit a FEMALE Post Distributor
3. Spark Plug B&T
   • 45 Deg. Spark Plug Boots (DEFAULT) -or- 90 Deg. Spark Plug Boots -or-  STRAIGHT Spark Plug Boots
4. Coil  Lead Length and B&T
   • Distributor End - 90 Deg. to suit a MALE Distributor (DEFAULT) -or- 90 Deg. to suit a FEMALE Distributor Coil; 
   • Coil End - 90 Deg. to suit a MALE Post Coil (DEFAULT) -or- 90 Deg. to suit a FEMALE Post Coil -or-;  
   • Coil End - STRAIGHT to suit a MALE Post Coil -or- STRAIGHT to suit a FEMALE Post Coil
   • Coil Lead Length (Using "Post To Post" Measurement) =            mm

Why choose ICE Ignition Pro 100 9 mm Leads / Plug Wires?

• More spark means a bigger explosion in the combustion chamber, this improves performance.
• ICE Ignition leads / Plug Wires ensure this by minimizing resistance in the leads.
• They are super-conductive with an ultra-low resistance of 100 ohms per metre. 
• ICE Ignition Leads / Plug Wires are made from the high-quality ultra-low resistance spiral wound copper alloy core.
• The alloy core is wrapped in ICE Ignition's proprietary insulation to provide maximum RF noise & heat shielding.
• They are fitted with stainless steel "Snap Lock" fittings at the distributor and spark plug ends.
• The boots are made from extreme-temperature silicone insulation and can withstand high temperatures.
• The ICE Ignition 9CHE813 Ignition Leads / Plug Wires are a finished set of leads. Just plug them in and go!
• Plug wire markers with an easy-to-install tool included. This ensures correct ignition lead installation.

WHAT'S IN THE BOX?

• 8 x ICE Ignition 9CHE813 Ignition Leads
• 1 x ICE Ignition 9CHE813 Coil Lead
• 1 x ICE Ignition 2800 Plug Wire Markers
• Instruction Sheet
• "ICE Ignition Plug Wires" Sticker

<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">

Product Features & Benefits

The ICE Ignition Pro 100 Lead set features:

• Spiral wound copper alloy core
• Ultra-low resistance of 100 ohms per metre 
• Delivers maximum spark and duration for improved performance.
• Built-in Radio Frequency Interference (RFI) minimization.
• All boots made from extreme temperature silicone to withstand high temperatures.
• Premium "Snap Lock" stainless steel Spark Plug, Distributor Cap & Coil fittings. 
• Numbered Lead Markers with easy to install tool to ensure correct lead fitment 
• Ready to Install Lead Set. No cutting or terminating of leads required.

<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">

We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. A 2 year warranty applies where the product is being used primarily in a racing application. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.

The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.

Gear Campus is the "Go-To-Place" for highly innovative Automotive, Boating, Fishing and Cycling products. We search the globe for groundbreaking products that align well with our vision. We also pride ourselves on providing the very best customer service and look to engage our customers at every opportunity. 

If you can't find the product in our store please contact us via eBay Message.

Gear Campus is the authorised reseller for ICE Ignition, Australia’s leading manufacturer of performance automotive and boating ignition systems. The ICE Ignition product range includes 

• Performance Ignition Systems for cars and boats using Digital Inductive Spark technology
• Ignition Leads for cars and boats with inboard & outboard engines
• Ignition Coils
• Voltage Boosters

We are also the Australian Authorised Distributor for SeaSucker vacuum mounted products. The SeaSucker product range includes 

• Bike Racks 
• Roof Racks, 
• Tablet Mounts
• Rod Holders
• Bait Boards
• GPS & Fish Finder Mounts
• Cup Holders
• Storage Products
• Dive Tank Holders
• & More

All SeaSucker products use their patented industrial vacuum mount with up to 90 kg of holding power from a single vacuum mount.

We are the authorised reseller for RAM Mounts, Lee’s Tackle and Reel Colors fishing solutions.

If it uses gears or cogs chances are you will find a revolutionary product at Gear Campus to suit your needs.

We accept payment by any of the following methods:

• PayPal
• Funds Transfer (account details provided during checkout)

We ship our goods to Australia, New Zealand, Europe and the US.

• Australia - We use Star Track Express to ship goods anywhere in Australia. We do accept Post Office Boxes as a valid shipping address although if selected we will send your goods using Australia Post with "Signature on Delivery"
• New Zealand, Europe and the US - We use Australia Post International Express Post service with "Signature on Delivery".

Please also note that the shipping rates for many items we sell are weight-based. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full kilogram.

If you need to return an item, please contact us via eBay Message with your order number and details about the product you would like to return.

At Gear Campus, we stand behind our products as our goal is to have as many customers as true fans of our products and services. That’s why we offer our customers a "30 Day Money Back Guarantee" on the cost of the product only.

As this is a custom product our 30 Day Money Back Guarantee does not apply if you have changed your mind. If you provided incorrect measurements there will be an additional cost to rectify this. Being a custom product made to your specifications it makes it impossible to resell the product once it is made.

​​​​​​​

Please ensure all packaging is kept as we do require the goods to be returned in the same brand new condition as you received them. This includes all accessories and product manuals. Please ensure the product you are returning has not been damaged in any way during the time it was in your possession. Failure to return the product in its original packaging including accessories and manuals and/or product returns that are damaged, have visible marks or are soiled will incur a Restocking Fee. The Restocking Fee is a variable fee and is dependent upon the level of damage or missing items.

Please Note: Our "30 Day Money Back Guarantee" does not include the cost of postage in your initial order. You should expect to receive your refund within a few weeks of giving your package to the return shipper; however, in many cases, you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 2 business days), and the time it takes your bank to process our refund request (5 to 10 business days). All refunds will be returned via the nominated payment method used upon the initial purchase. We will confirm via email when we have initiated the refund.

We will ask why you are returning the product however this is to help us better understand our customers and how we could improve our products and services. Furthermore, we will respond quickly with instructions on how to return items from your order.

The cost of returning the product is your cost. The goods will remain your responsibility during transit until such time that they arrive at the designated address provided by our staff. We accept no liability for any loss or damage that may occur during transit.