24V 30A volt Lithium battery charger, Fully-Automatic Smart Charger 85% Charging Efficiency for 200AH-300AH Lead-Acid, AGM, gel and LiFeP04 Batteries with LCD Screen & Temp. Control for Forklift/Golf Cart/Scrubbers/Sightseeing Car Notice: Our charger is only suitable for 24-volt batteries, please kindly confirm whether your battery is 24-volt before purchasing to prevent damage to your battery. Instructions: 1. firstly connect the battery connector, then plug it into 110V or 220V power supply, turn on the power switch, and the machine will output current and voltage after self-checking for 3-4S.The digital display shows the current and voltage, the charging indicator light is on (red), and the charger may make a slight noise. When the battery is fully charged, the full indicator lights (green). 2. The digital display shows that the voltage and current are zero, and the fan stops after a delay of 60-120S. When the charger is over-temperature and over-current, the fault light is on (yellow), and the digital display shows zero voltage and current. 3. After charging is completed, turn off the power switch, then unplug the power supply plug, and finally unplug the battery connector. |
Fast Charging | Fully Automatic | Smart Temperature Control | Light Weight & Portable |
Precautions 1. Be sure to distinguish the "+" and "-" poles when using the charger machine, which is available for 24V, 200AH -300AH lead-acid batteries. 2. Ensure that all connections are made with the power cut off. The correct sequence is to first connect the battery connector, then connect into the 110V or 220V power plug, turn on the power switch, confirm that the ground wire is connected reliably and there is no looseness, and finally connect the power plug into the power supply. 3. Do not use the way of charging connection to start the engine, which is easy to burn out the meter and motor. Cautions (Environment) 1. The operation of the machine should be carried out in a relatively dry environment, and the air humidity should not exceed 90 % in general. 2.The ambient temperature should be between -10℃ and 40℃.
3. Avoid operating in strong sunlight or rain, and do not allow water or rain to seep into the machine. 4. Avoid working in dusty areas or environments containing corrosive gases. 5. Avoid operating in an environment with strong air flow. Package includes: 1* main unit |