Application Instructions:
1) Remove the remnants of the original decal from your loco. A good way to do this is with sticky tape.2) The repalcement "Triang Railways" emblem is produced on white background decal paper, so very carefully cut around the edge of the oval with a pair of sharp scissors.3) Submerse the decal in water for around 10 seconds. Retrieve from the water & leave for a further 10 seconds. 4) Rest the decal next to the required position on the loco & with one's fingertip carefully slide the decal off it's backing paper into place. 5) Once in correct position, carefully dab any excess water away with a piece of kitchen roll or tissue. 6) If the decal requires repositioning, then apply a drop of water or two to the decal, which should raise it toallow repositioning. Repeat part 57) And finally allow decals to dry for 24 hours before handling of loco.(Note: loco is not included in this listing)