This is a retractable golf simulator impact screen DIY kit. The motor and the 3 layer Pro impact screen are special designed to hold golf ball repeated hit impact force. The DIY kit includes a heavy-duty motor drive kit and a selected length 2 1/2"(63mm) tube CL800-D63 with selected size impact screen fabric. You also may add side protection screens if you need. The drive kit can lift heavy load screen with screen widths extending up to 200". Special engineering structure for heavy load and long span. The motor can be mounted on the left or right side.

It can be operated by the remote (includes in the list). With an add-on smart module (sold separately), it also can be controlled with a timer, wall switch, and smartphone or voice-controlled by Google assistant or Amazon Alexa. 


Please note, the size we listed is the size for the drive tube length, the tube will be 2" longer than the width of the screen, and the screen height is adjustable but maximum usable is 118". The extra length of screen can be wrapped on tube for low ceiling installation. The assembled kit width is around 2 1/2” longer than the tube because brackets and motor take space. For example, if you ordered 120 inch kit, the screen is 118 inch wide, and the tube is 120 inch long, the assembled kit width is around 122.5". Make sure you have space for 122.5" space to install it. There will be 1" tolerance. 

Brackets and remote control are included in the package. One remote can control both main impact screen and side screens. You can open/close screens at the same time or individually.

Note: This is the DIY kit. 
 If you prefer us sew the bottom protection pad, please choose choose the size with protection pad.

  Factory will cut to the size and ready for you to assemble it. It does require some level DIY skill to assemble and install the screens. Make sure that you read and understand the reference guide and motor manual!

Main impact screen motor info:

Features

  • Compact design with a motor, transmission box, RF receiver, and controller all in one tube
  • Special designed motor brake for holding up high impact force and perfect for golf impact screen and hurricane shutter
  • Programmable electronic upper/lower positions
  • Stops at any position by pressing "STOP" button
  • Can be mounted on ceiling, wall, or any other angled surface
  • Motor runs quietly and remains silent on standby
  • Group control to run multiple motors up or down simultaneously or individually
  • Double hall feedback sensor for precise position
  • Safe and reliable with overheat protection
Specifications
  • Operation voltage: 120V AC, 60Hz
  • Operation power: 200W
  • Protection Class: IP44, Class H
  • Rated RPM: 18
  • Rated Torque: 40N.M
  • Frequency: 868MHz
  • Noise Level <45dB
  • Precise limit switch, repeated resolution <3 ° 
  • Maximum load <282 lbs (128kg)
Side protection screen motor info:

Features

  • Slim design prevents sun light from coming through the installation gap (1/2" on each side)
  • Can be mounted on ceiling, wall, or any other angled surface
  • Motor runs quietly and remains silent on standby
  • Group control to run multiple motors up or down simultaneously or individually
  • Stops at any position by pressing "STOP" button
  • Double hall feedback sensor for precise position
  • Programmed upper/lower positions and 1 middle favorite positions will remain when power is off

Specifications

  • Operation voltage: 110 to 240 AC
  • Operation power: 19W
  • Protection Class: IP44
  • Rated RPM: 12/22
  • Rated Torque: 14in.lb (1.6N.M)
  • Frequency: 868MHz
  • Noise: 25-40db
  • Working tube size: 1 1/2" (38mm)
  • Maximum load with 1 1/2" tube < 17.6lbs (8Kgs)
  • Minimum width: 18"
  • Maximum width: 142"
  • Approximate inside mount fabric deduction: 1"
  • Minimum inside mounting depth: 3/4”
  • Fully recessed depth: 2” – 3”
Main impact screen Fabric info:

3-Layer Impact Screen Pro

GI320W Pro golf impact screen fabric is specially weaved with special polyester yarns in three layers – a white soft layer, a buffer middle layer, and a white hitting layer. The buffer middle layer absorbs impact force exceptionally well and reduces impact noise. The screen can hold the greatest golf ball impact force. 

Features

  • Style: special three layers construction to absorb impact ball shots
  • Color: White. 
  • Material Content: 100% polyester
  • Openness: light filtering
  • Fabric Weight: 14.15 oz/yard

Applications 

  • Special designed for absorbing high speed golf ball impact force.
  • Great noise cancellation and low bounce back
  • Dedicated golf impact screen 

METechs three layer retractable golf impact premier screen fabric GI320WBW.jpg

METechs GI320W-Pro professional golf impact screen


 

Side protection screen fabric info:

Features

  • Style: Waved Plain. Special designed for golf impact screen and display backdrop
  • Color: White
  • Material Content: 100% polyester
  • Openness: Light Filtering
  • Max Fabric one of Width/Length: 126"
  • Fabric Weight: 9.8 oz/yard2
  • Tensile Strength warp: 410 ib
  • Tensile Strength weft: 410 ib

Golf impact screen fabric with golf

Golf impact screen overview

Package Content

  • One tubular impact motor 
  • Optional side light duty motors
  • One RF remote
  • Mount brackets
  • Selected size screen kit. Main impact screen comes with 3 layer blackout fabric, side protection screen comes with standard (one layer)  fabric
  • DIY assemble and installation instruction