Description
 
Ustars Audio R28 Digital Audio Decoder Board DAC Board IIS HIFI 384K DSD256 For Raspberry Pi

Read Before Purchasing:

- Hands-on ability and basic knowledge are needed for product installation and using.
- Only fits users for Raspberry Pi and related player software Volumio and Moode.

Features:
1. Professional IIS digital processing solution, support 384K/DSD256
2. Using an ES9028Q2M audiophile decoder chip
3. ES9028 works in synchronous mode and the sound is more durable and delicate
4. Board for Raspberry Pi plays music through the IIS mode, the listening experience is smooth, real and natural
5. Use the general version for VOLUMIO, MoodeAudio. The official version for VOLUMIO can support 44.1-192KHZ, DSD64-DSD128 original code hard decoding. The official version for MoodeAudio can support 44.1-384KHZ, DSD64-DSD128 original code hard decoding
6. No need to set output resampling, just turn off by default, truly original code lossless output
7. The LPF output adopts dual power supply plus op amp mode, equipped with JRC5532 op amp, which can be replaced by a suitable conventional dual op amp. The power supply is plus or minus 15 volts, which effectively exerts the potential of the operational amplifier, which is better than low-voltage or single-supply power supply solutions
8. Through the combination of jumpers, 4 sets of DSD digital filter coefficients and 3 sets of PCM digital filter coefficients can be set, and you can experience a variety of different sounds on one board

Parameters:
Analog Output:
- DAC decoding chip: ES9028Q2M. PCM 44.1KHz-384KHz/32Bit, DSD DSD64/128/256 (hard decoding)
- Two-channel RCA output: 2.1Vrms/-0dB
- 3.5 Earphone holder: 2.1Vrms/-0dB
- Attention: Both the headphone holder and the RCA holder are connected to the LPF output. The 3.5 headphone jack is connected to most headphones and can produce sound. The decoder board itself does not have an amp circuit, if buyers want to connect their headphones to use, they need to equip suitable headphone amplifier to get better drive effect)

Parameter Test Description:
For Raspberry Pi 4B (version 1.2) to install the optimized version for MoodeAudio640. The output setting is: Audiophonics ES9028/9038 DAC, measured when playing music files on the USB flash drive, there will be differences under other conditions, for example: for MoodeAudio7.01 can support PCM384KHz /DSD128.


 


Powered by:
The 5V power supply of the board is directly connected to the 40P interface of the board for Raspberry Pi. There are two ways to supply power as follows:
a. Directly use micro_usb to power the board for Raspberry Pi, and power the decoder board from the 40P interface of the board for Raspberry Pi
b. Power is supplied from the DC socket input interface of the decoder board, and the decoder board supplies power to the board for Raspberry Pi through the 40P interface
Attention: Only one of the two power supply methods can be used at the same time, and the two cannot be used at the same time, otherwise it will cause damage to the board, the board for Raspberry Pi or the power supply.

Board Power Supply Interface Input Specifications:
- Power supply voltage: DC stabilized voltage +5V, voltage range: ±5%
- Power interface specifications: 5.5/2.1, inner positive, outer negative
- Suggested power supply current: ≥2000MA
- Single board working current: <100MA (board for Raspberry Pi not included)
- The pictures on the product introduction are for reference only and are subject to the actual product. As the raw materials supplied by the market may change, the product is subject to change without notice. Thank you for your understanding!

Compatible Main Boards For Raspberry Pi:
- For Raspberry Pi 2B
- For Raspberry Pi 3B
- For Raspberry Pi 3B+
- For Raspberry Pi 4B

Package Included:
- 1 x Set of Decoder Board

Note:
- Board for Raspberry Pi is not included.
- The optimized version for MoodeAudio640 is only available for Raspberry Pi 4B (version 1.2), Raspberry Pi 3B+ and Raspberry Pi 3B. Most of boards for Raspberry Pi 4B (version 1.4) or above versions currently on the market cannot be used for MoodeAudio640.


For MoodeAudio Settings:
The setting method uses a mobile phone connection. Take settings for MoodeAudio7.01 as an example. Other versions may have differences. The setting method for VOLUMIO is similar. Please handle the basic operations such as memory card flashing and setting up the network by yourself.

Payment Terms
 
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
 
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
 
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
 
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
 
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.


Am 21.11.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:


Am 11.10.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques