Lighting, Starter and Engine Stop Kill Switch for 1974 Honda CB360G
**Will ship internationally**
Honda part no. 35300-369-671. Switch manufacture date: August 1973.
Function: Lighting On/Off, Starter switch and Engine stop Kill switch. Mounts on Right-Hand handlebar.
Correct fitment for:
1974 CB360G
This is a reconditioned Genuine Honda switch in concours condition. It is not an aftermarket part. Switch manufacture date: August 1973.
Switch gear and housing have been inspected, repaired, cleaned, aligned, and calibrated. Switch includes color-correct 18 ga. wiring (eight wires), Honda factory-solder 3.5mm bullet wire terminals, new and pliable Black wire harness sleeving, and authentic new JIS mounting screws. Genuine "Tec" logo Start button.
Wire colors (8): Black (2), Yellow/Red, Yellow, Black/White, Brown/Blue, White/Yellow, Black/Red
Bench tested and fully cycled; All Checks Good. Very smooth and crisp switch action.
For the matching 1974 CB360G Turn Signal, Horn and Dimmer switch, see Item Number 115938230892.
Please check your bike's fitment. Occasionally in mid-year production, Honda is known to have changed switch configurations, or dealers replaced an original switch with an updated Honda or aftermarket service part. Check your wire harness colors, and make sure this switch is correct for your application.
Reconditioned switches by Deuce_67: These switches fill the niche between salvaged switches which are usually damaged, corroded, missing pieces, and do not work; and NOS switches which are often shelf-worn, without mounting screws, brittled cracked wire harness sleeving, cannibalized, rare and expensive. These reconditioned, complete and tested switches are factory original pieces (no aftermarket) offered as a practical and trouble-free alternative. 24 month Warranty. Return for free repair or full refund.
** We can recondition the original switches from your Vintage Honda. See eBay item number 115808278042.** (Copy and paste Item Number into the Search box at top of any eBay page).