STAGE 3 (1MS)

170% INCREASED HOLDING CAPACITY

STREET/TRACK APPLICATIONS
(HEAVY-DUTY STREET USE AND OCCASIONAL DRAG / ROAD / DRIFT RACING)

The Action Clutch 1MS Stage 3 Kit uses their extremely durable, High Performance MIBA Sprung Ceramic Disc. This kit features a single diaphragm heavy-duty pressure plate with reinforced drive straps for increased durability. It is available in a 4 and 6 MIBA Ceramic puck configuration with the 4 puck being the more aggressive of the two. This MIBA Sprung Ceramic kit is engineered for low/mild horsepower vehicles. This Stage 3 MIBA Sprung Ceramic kit creates quick engagement as well as clutch chatter, which should be minimal once proper break-in is completed. Like all of their sprung kits, our Stage 3 kit features fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine as seen with competitors. After each kit is assembled, it goes through multiple quality checks before it is signed off by one of their lead engineers (50+ years combined experience).

Break-in Requirements
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.

*Increase in holding capacity is rated in Crank Torque, not Wheel Torque.

Pressure Plate Features

Ductile Iron Friction plate
Single Diaphragm HD Pressure Plate
Reinforced heavy duty drive straps
4 stage Heat treated diaphragm spring
American grade rivets
100% dynamically spin balanced

Clutch Disc Features

MIBA Ceramic Sprung 6 Puck Clutch Disc
Patented, Fully Enclosed, Spring Retainers
Sprung Hub For Easy Engagement
American Grade Rivets

SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

ITEM DESCRIPTION

Clutch Size: (8-1/4" x 7/8" x 20 spline)
Torque Capacity: 275 lb-ft
HP Rating: 314 HP

What's included

Single Diaphragm HD Pressure Plate
MIBA Ceramic Sprung 6 Puck Clutch Disc
Premium Throwout Bearing
Premium Pilot Bearing
Clutch Alignment Tool

FITMENT

Fits 1989 - 1991 Honda CRX (1.5L, 1.6L SOHC 4cyl D15, D16)
Fits 1989 - 1991 Honda Civic (1.5L, 1.6L SOHC 4cyl D15, D16; fits all model except RT 4WD Wagon)

SHIPPING

All packages are sent via USPS or UPS

However, once the package gets picked up from our location, we have NO control over how long the carrier takes to deliver the item, at times the terminals can be congested and take up 1-2 day delays.

INTERNATIONAL: All INTL packages are shipped using USPS, all import and duty fee's are buyers responsibility to pay. Express shipping is available upon request

RETURNS

We offer a 30 Day Return Policy, Buyer pays for return shipping.

WARRANTY

Action Clutch warrants this product against defects in material or workmanship as follows:

Action Clutch will replace at no charge for parts only that proves defective because of improper workmanship. If Action Clutch is unable to provide a replacement and repair is not practical or cannot be made in a timely fashion, Action Clutch may elect to refund the purchase price in exchange for the return of the product.

Action Clutch offers a 90-day warranty from the original date of purchase. Action Clutch also offers a 30-day return policy with a 20% restocking fee.

Action Clutches warranty does not cover any problem that is caused by:

(1) Conditions, malfunctions or damage not resulting from defects in material or workmanship. (2) Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration. (3) Accessories, connected materials and products, or related products not manufactured by Action Clutch. (4) Damaged input Shaft causing HUB to strip (5) Failure to resurface the flywheel will invalidate Warranty.