Description

 

BLIKVM V3 HAT Blue PiKVM KVM over IP Raspberry Pi 4B PoE HDMI CSI for Server Operation Maintenance

User Manual:
https://wiki.blicube.com/blikvm/en/

Features:
* Video acquisition (HDMI, support 1080P at 50Hz input)
* Keyboard forwarding
* Mouse forwarding
* Mass storage drive
* ATX control the server power using ATX functions
* Full-screen mode
* Access via Web UI
* Support multi-language switching
* Support PoE
* Serial console port
* OLED display
* Real time clock (RTC)
* PWM fan

Package Included:
* 1 x Raspberry Pi IPKVM HAT
* 1 x ATX Adapter Board
* 1 x USB/PWR Splitter
* 1 x HDMI Pass-through EDID Emulator
* 1 x Metal Case
* 1 x 32G TF Card
* 1 x USB Type-C to USB Type-C Cable 30cm/11.8"
* 1 x Dupont Cable 8pin Female to Female 40cm/15.7"
* 1 x Dupont Cable 8pin Female to Male 40cm/15.7"
* 1 x Philips Screwdriver
* 1 x Cross Wrench Sleeve

Note:
* Battery is not included.

Packaging Details:
* G.W.: 0.5kg

 

Interface Definition:
HDMI IN:
The bridge chip is TC358743 for Toshiba, which supports both video and audio (I2S), and the highest input resolution is 1080p at 50fps. Fixed HDMI back power issue.

CN-ATX:
The CN-ATX interface is connected to the ATX adapter board (an accessory for the HAT) through a network cable, which can turn on, off, and restart the controlled computer.

Display:
A white OLED display with a resolution of 128x32, and the chip is SSD1306. This display can show the temperature, IP address and other information of Raspberry Pi.

POE:
* Standard: IEEE 802.3af PoE
* Input voltage: 37-57V DC
* Output power: 5V DC/2.4A
* Plug in the PoE jumper cap to enable PoE power supply

Fan:
The IPKVM HAT is fitted with a small fan that is controlled by your Raspberry Pi via GPIO12.

Real Time Clock (RTC):
The clock chip is PCF8563 that is controlled by your Raspberry Pi via I2C. A coin cell battery (not included) can be installed under the HDMI IN module.